JesseJames

Discord ID: 355524998233849856


568 total messages. Viewing 100 per page.
Page 1/6 | Next

Great to see all you goys

Not for me I just got a link to here after only having my state server since the main went down

I don't have the fitness one

Gotcha

How far right? Nationalist right?

I guess I should give my skills. I'm a former ase certified tech of 9 years and now work on heavy equipment. I'll keep an eye on the mechanical page to see if I can be of service

I've done a little concrete sidewalks and setting posts.

I tried my hand at remodeling a house I chose a civil war era house for my first turned out great and was fun sold it and made little profit wish I had kept it. All original doors and trim railings and all. What few pieces of trim that was missing I duplicated the original. Had one modern bath room and a modern kitchen but kept the rest old school.

If so wasn't me if that's what your referring to

@John O - on the house?

Believe me I know man. I bout the house for 75 and sold it for 120 but unfortunately I ate up all the profit redoing it and building garage

@John O - spread your seed and maybe you can get one.

Yep the gross don't mean shit haha. If I had a chance to do it over again I could have done much better I made a lot of mistakes and done some things over a couple times and spent way to much on insignificant things and not enough on other important things.

I was 21 when I wed my wife and knocked her up the first time lol

Going back through and looking. @JohnStrasser you get your bike tire changed?

White person?

They can't use that because the nogs couldn't say it. Maybe upop

I often miss machining. I went to half of a college course and started working at a machine shop setting up Cnc writing some programs and doing qc with cmm. I miss it for sure.

Crap just seen this for some reason. If thats the case I don't blame you. But if you ever need help with it shoot me a pm.

@Phillip Wiglesworth - FL I feel for you brother. I have 1 girl and 2 boys.

@Erika Thank you they take after me of course! Haha just kidding.

Cards are how I'm here now thanks to @Punished Ajax he handed me the red pill card at a rally and it's been a long journey since. So I say they are a great asset.

I had a cousin graduate from harvard and was the president of their institute of politics. Then went on to work for bill de blasio

And he's a fag

Any trade is never a bad idea. I recommend electrical of the industrial nature. Tool and die , welding, pipe fitting hvac. Medical trades like X-ray tech and such are great too.

The ideal situation for a young man would be to find a company who will hire you and give you on the job training while paying you to go to school. I know that may be far fetched but it does happen. The only thing is you have to sign a no compete for 5 years or so.

As a young 19 year old I had that very opportunity but I pissed it away.

I went to school for machining. Worked at a machine shop writing programs doing set ups and tool changes on cnc machines for production use. Started out at 40k and loved it. Would probably still be there but I was stuck on 3rdshift with no sign of seeing first within 15 years. So I quit and became and automotive technician. Was very successful and was making over 60k after a couple years. I got to where I hated my job and spent my time off dreading going back in. So I quit and now I work on heavy equipment and like it for the most part because I travel all over the state and never do the same thing at the same place day to day

I don't think it's just young people. Everyone now days want to be millionaires that party all the time and don't want to have to earn anything.

Your managerial experience would almost garuntee you a job if you learned a skill

@RevStench same here bro

Kids now days think they can rap or do pranks on YouTube and become rich and famous. It's so easy why bother with learning anything.

I know a couple plumbers one industrial and one residential both do well for themselves

@John O - ya the older generations are to blame for a lot of bs if you ask me.

One thing about unions is after Charlottesville I heard of a few guys getting doxxed and losing their job. Of course they weren't get out of the union but I'm sure it will follow them around. Johnny monoxide being one of them.

Ya he is on mike and the mad wop and paranormies. On episode 1 or 2 or mike and the mad wop he gives the whole story of what happened.

I do when I need something not so serious and comical to enjoy between listening to audiobooks.

Check out fash the nation. For sure a good one and definitely not like the daily shoah

It's hard to diagnose something like this over the net. If @Brenten.Ryan-AZ can't find a tsb or anything on it I would be happy to take a ride in it with you and see what we came up with. One of the reasons I quit working on cars is because of having to diagnose shitty problems like this but with that said I do have plenty of experience doing it. My initial thoughts are driveline forsure but sometimes a quick test drive with the right person may reveal the issue or at least give a good starting point. Chassis ears are a great invention and makes noise diagnosis so much easier. Wish I owned a set. I was spoiled as a dealership tech and they where always a special tool that was provided.

Yes we where actually together last weekend ha would have been a good time to check it out. I haven't been a tech for 4 years now. I was a Nissan tech for 8 years and spent at least 6 of those years doing electrical engine drive ability noise diagnosis and repair.

Sometimes you can have a problem of a messed up bushing that could be causing a vibration and/or noise. @Deleted User anytime man.

@Brenten.Ryan-AZ Hey at least your going into heavy trucks and diesel repair. 08 to 10 was hard on us automotive guys and it seemed like the diesel guys where impervious to the recession. I know work on heavy equipment. All I do know though is change tires on them. So no diagnosis or repairs just change the tire and go. Most of my days are spent driving my sterling boom truck all over the place.

@Brenten.Ryan-AZ ha I would rather change those pan tires over those semi truck tires any day. My truck does all the hard work. With semi tires you have to do them by hand. I have to do some semi tires here and there but mostly Otr

Otr-off the road

The tires on the machine in the photo weigh roughly 3k to 4K each

It's of Japanese origin forsure.

Sportster has a v twin design engine.

I'm no expert but I have seen guys that claim the fire was too rapid and to consistent to be a bump fire stock. What do you think?

Do that and then check for 12v at the ignition switch also. Does it do anything at all? Normally if your battery is good and cables good but everything is dead it's a fuse and/or relay.

If we know what they're supposed to be. Of course the switch should be 12v.

Have you tried to roll start it by chance?

Oh gotcha. Have you checked fuses? First thing to do on any electrical problem is check fuses. Just use a test light to both sides of the fuse.

Great glad you fixed it. That's why I say any electrical problem check your fuses first. And barley blow is blown as long as it isn't solid the current can not travel through it. When you took the carbs apart did you replace the gasket? Those paper gasket are made for one time use only if you take it apart you need to replace it.

@Deleted User done. The dislikes are at 50k

A white pill to me is.... I have a sock Facebook account I use to follow normie pages. I have to say I have noticed a lot of them posting about and mentioning the war on whites. If it wasn't for the hard work by people in our movement this would never happen on these sort of pages. I'm not sure if they have been red pilled or if it's just so obvious they can't help but to mention it. Now keep in mind these sort of pages these people use to make a living so of course they play to their audience. So that tells me that their audience it's more accepting of this kind of talk. So that is a huge. White pill to me on our road of waking up the masses.

Didn't they claim there was a holocaust before the holocaust with the same number?

Eh I don't remember any specifics just remember reading it somewhere.

If you have a member on campus not worried about being doxxed and you all can ensure your safety I would take them up on it.

Just looked. I reported again. Wtf they admit it's in violation.

Me either.

Oh hell I didn't realize it was you. Great job brother!

I went from turtle necks and sweater vests to polos and sweater vests in my early teenage years.

If I'd seen them I would have had to say you want me to eat shit you'll have to make me.

I was taught many different things from my father my grandfathers and great grand fathers on both sides. I teach my sons how to do everything I know.

It just kills me how they claim white supremacist literature found on campus and accompanying that has a picture that says our destiny is ours. I can't imagine a normie having any other reaction than "what the hell is white supremacist about that, I'm going to google these guys and see what they're about." And then hopefully that leads them to our website.

That is something (((they))) would say.

@Whitelash ya of course I love it. The reason I say it kills me is because it cracks me up that they're not smart enough to realize they're pushing people right into our open arms.

They didn't accept me.

No I don't remember what I said to their question but I was trying to appear normieish

Not gotten anything back

It's been since last time you posted about it

Someone posted about this group maybe a week ago or something and I tried to join then.

Thought it was you

^sick led light show or something dramatic and high tech.

One day as the victors we will write history as the alt right.

Good work @Joe-MN

^done.

2017-10-25 23:13:40 UTC [tradworker #tradworker]  

I hear byu is cucked badly now.

The helmets look photoshopped as well.

Sorry couldn't resist.

2017-10-25 23:45:10 UTC [tradworker #tradworker]  

I don't have any first hand knowledge. I was talking to a couple guys one graduated from there the other still went there. They say Marxism has taken its toll on it also.

2017-10-26 01:53:58 UTC [tradworker #tradworker]  

Those cl ads come out for every rally I wouldn't worry. I'd say it's a troll

That reminds me of the good times in high school.

I know a husband and wife that did mlm type businesses and saved up enough to start their own store. They seem to be doing pretty good. Successful people will succeed no matter what they do.

2017-10-27 00:53:12 UTC [tradworker #tradworker]  

I hate the no back pack deal.

2017-10-27 00:53:30 UTC [tradworker #tradworker]  

No knives for fucks sake I don't go anywhere without a pocket knife.

2017-10-27 01:19:47 UTC [tradworker #tradworker]  

Tell him if nothing else he can get a big bandage to put over the tat I know guys whom have had to do that before.

2017-10-27 01:28:36 UTC [tradworker #tradworker]  

I don't know how good looking of a man he is but I'd say a bandage would look better on him than a golden infinity scarf haha

2017-10-28 03:26:26 UTC [tradworker #tradworker]  

No kyle wasn't in Gainesville your thinking of Cameron Padgett.

2017-10-29 22:32:22 UTC [tradworker #tradworker]  

As a member of IE I can back up @JRobertson 100% on membership.

568 total messages. Viewing 100 per page.
Page 1/6 | Next