Message from @Smiter-IL

Discord ID: 383809462319972363


2017-11-24 18:14:55 UTC  

Go @Dustin !

2017-11-24 21:54:49 UTC  

LOL. love it when the libs tear down their own lib administration

2017-11-24 23:50:04 UTC  

What is the cheapest option for bulk color printing ? Is there some shitty online place where I can order a few boxes that will be cheaper than the local Fed ex office ?

2017-11-24 23:51:08 UTC  

Also some tips on creating and hanging banners for overpasses or things like that .

2017-11-25 00:22:22 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774378724425729/image.png

2017-11-25 00:22:29 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774409753755648/image.png

2017-11-25 00:22:33 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774428552495115/image.png

2017-11-25 00:22:40 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774456612519946/image.png

2017-11-25 00:22:47 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774484601110528/image.png

2017-11-25 00:22:52 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774505572761614/image.png

2017-11-25 00:22:56 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383774521687277568/image.png

2017-11-25 00:24:53 UTC  

@ashrob NJ looking good sir! Nice work.

2017-11-25 00:28:48 UTC  

Thanks means a lot coming from the reigning champ @joe TX

2017-11-25 00:43:20 UTC  

@Taylor TX There is an activism guide pinned in this channel you'll have to scroll up

2017-11-25 00:44:03 UTC  

Rutgers is a big job tho

2017-11-25 00:44:37 UTC  

We need to do umd one of these days @FlintShrubwood

2017-11-25 00:44:51 UTC  

Yea. Remember @Charlemagne MD We got a big response last time. Tim hit it I believe.

2017-11-25 01:49:49 UTC  

Great job @ashrob NJ

2017-11-25 01:50:23 UTC  

Thanks my man

2017-11-25 02:41:46 UTC  

Just bought a banner making setup.
A drop coming in the near future.
Im thinking of doing an Anti Com short slogan or "America Is Our Birth Right. "

2017-11-25 03:21:21 UTC  

@Taylor TX you can ask me about banners.

2017-11-25 03:29:52 UTC  

@Goodest_Boy average cost for a cheaper banner? Where do you buy your supplies (mainly the banner material and the method to secure and weigh it down)

2017-11-25 03:30:29 UTC  

PVC is cheaper, was scrolling in this thread and saw someone recommend master locks?

2017-11-25 03:45:23 UTC  

If you can jump in general chat in a couple minutes I can cover everything there.

2017-11-25 03:48:29 UTC  

@Goodest_Boy laying in bed with little one trying to settle him for bed. Give me a few and I might be able to hop in if nothing else than to listen to instructions with some headphones in.

2017-11-25 03:49:17 UTC  

You can pm me to if that works.

2017-11-25 03:51:23 UTC  

@Dustin @ashrob NJ Great looking work guys

2017-11-25 06:20:44 UTC  

https://cdn.discordapp.com/attachments/364051970409103362/383864568272650240/20171122_211823.jpg

2017-11-25 06:21:15 UTC  

These are what I'm issuing to weigh down my banners.

2017-11-25 06:21:53 UTC  

Usually found near the lumber section @ home depot.

2017-11-25 06:22:33 UTC  

Are you using Two plates and a bolt and nut?

2017-11-25 06:23:13 UTC  

Just 2 plates, 1 for each corner. Secured with a strong zip tie.

2017-11-25 06:23:54 UTC  

Maybe a little duct tape.

2017-11-25 06:25:11 UTC  

You can punch 4 holes in the cloth and use 4 zip ties on one plate

2017-11-25 06:25:33 UTC  

One moment...

2017-11-25 06:27:43 UTC  

I found these @ different sizes in a different hardware store - Orchard hardware. And they were cheaper in-store than the website says for some reason. Grommets already installed.

https://cdn.discordapp.com/attachments/364051970409103362/383866325153611787/Screenshot_20171124-222607.jpg

2017-11-25 06:28:30 UTC  

If it has grommets then your set.

2017-11-25 06:29:07 UTC  

Just make sure you have large enough zip ties or use multiple

2017-11-25 06:30:36 UTC  

I could only find large plastic ones, they work well. Very strong. I want to try metal zip ties - they might be harder to cut.

2017-11-25 06:31:45 UTC  

Make the entire banner out of sheet metal.