We made two of these about a year ago now that are the same concept. One of them is painted white and the one shown is stained, but nobody was interested when we tried to sell them so they have just been sitting around. I suppose they are just too bulky and don’t mesh well with modern minimalist style

Just remembered to take a pic of this after it was finished

Both this channel and <#453241577062662146> have loads of content now. It’s hard to say which is better

Spent this weekend pulling up our old rotting 20+ year old deck boards and replacing them with some composite boards

Need to get a few more 16ft boards before I can finish the middle of the deck

All in a days work 😂 building a new shed

Redwing is the shoe brand of the ethnostate

Like the ethnostate will 😂

Got to this point in a weekend, next weekend I’ll be putting up the siding/trim/painting and then finishing the roof off with some shingles

Pretty much done with it, just need to finish the shingles and then do the trim/paint

Oh and build a door

Yep 😂

And the first day was spent driving around buying all the stuff I needed

All done 😄

Lol. Perfectly square 👌🏻

Here’s a small business I just made and have already made a small profit on https://havamalheathens.com

It’s pretty hands off, but the same model could be done for other products and probably make even more money than what I’ve been making with the one above. All my sales have come from free Instagram traffic too so I haven’t invested much of anything.

Most the accessories I get from suppliers and sell, and most of the clothing are my own designs and then they are printed, quality tested, and shipped at the point of purchase, so there is no upfront cost on my end. It just depends which product it is. Some accessory items are using the same print method as the shirts.

I’d say both are equally important, but the latter is more pressing

Dewalt, but I’m not sure about chisels

I just got back into lifting and sparring with a friend from work last week. I was so sore afterwords I could hardly move lmao

That video in the announcement was perfect 👌🏻

I’ve been wanting to make videos with that aesthetic for as long as I’ve been involved in IE

I got bored...

and this shot was bad ass

Thanks 🙏🏻

They make a roof patch product that you can buy at Lowe’s

There’s a whole assortment of different products there

I’m sure Home Depot and Menards have the same stuff or something similar if they are closer to you as well

I sent you a response in the general channel, but I missed the part about the chimney. The sealant should still work though and then like rev said you should take a look at the metal flashing. @Rick

I remember some of my dreams. Usually if I’m extremely tired I won’t remember them. Also sometimes music will help me sleep, or just getting off any electronics for an hour or two before bed

They didn’t post in order 😓

Ooh that looks nice. What kind of finish do you like to use? I’ve been using a matte polyurethane. I plan to make two matching nightstands sometime soon as well as a chest that sits at the end of the bed. I want to give them a glossy finish, so I won’t be using the poly (don’t like the way glossy poly looks). Any suggestions?

If a white guy were to suddenly have to move to another state to be closer to family and is totally not white flighting his way out of a state with Muslim representatives, what state would his family be located in?

You don’t want to drown faster?

You know the Muslim Somali woman that won is in a district so small that it basically consists of the little town all the Somalis live in, which is why she had over 80% of the vote lol

A pretty large chest I made to sit at the bottom of my bed. Should look really nice when I stain /finish it

The hinges for the lid and the handles haven’t arrived yet either, but I found some really nice hinges hat allow the lid to over hang on the back

Nice they have some cool bail pulls on there. Wish I would have known before I bought the ones I did so I could have more choices. Either way the ones I got are fine though I guess.

Thank you.

That’s true. I’ll see how it looks before I install it and return it if I don’t like it

@Sonic thanks, 😄 will do!

Here’s my latest project. Just a simple stand for my desk

That’s cool. I haven’t run into a situation that requires any of my chisels yet.

tfw no music channel. Here's a song I just started working on. I have about 5 hours put into it at this point and all the sound design/synthesis as well as pretty much every single aspect of the song were made or recorded by myself. https://soundcloud.com/envian/song1-2018-2/s-TFhx5

Oh nice. I didn’t see those 😂

Haven’t had a chance to listen yet, but one trick I use when I make basses like that is to apply a multiband compressor to it so that I can apply certain affects such as distortion to the mids and highs without it killing the low end of the bass. This also allows me to keep the stereo width of the bass at 0 while also being able to add width to the mids/highs. If you use ableton I actually made a rack for it that you can just drop into the audio affect rack @Deleted User

Ty 😃 @celticflame

Ableton has a multiband compressor that splits the frequencies up into the lows/mids/highs on one track and then allows you to add your affects to each frequency range which would reduce the need for multiple tracks with multiple affects on each track which just helps with cpu and also gives you better control over the frequency range of each category (lows mids and highs) without having to basically make three separate midi/audio tracks and then group them together to apply affects over all three. Basically it’s like splitting them into the three tracks and then grouping all tree together to give you the ability to add certain affects to the entire sound but with the control of keeping the bass in mono. You could do it manually, but why go through the trouble when you can just throw on the multiband compressor and be done with it. There are many other uses for multiband compression that you can use at that point as well but I don’t tend to use it for much more than that myself except for when I’m doing sound design.

I’ll upload the ableton rack I made so you can use it if you want

https://soundcloud.com/envian/song1-2018-2/s-TFhx5

https://soundcloud.com/envian/wirra/s-2NiN2

https://soundcloud.com/envian/frequent/s-R8Xri

here are the main 3 songs Ive got right now.

https://soundcloud.com/envian/perennial-enigma/s-Tnark

make that 4 actually

I started this one like 5 years ago though and im still not really too happy with it

👍

Thanks 😃 Most of my music background comes from playing rhythm/lead guitar growing up

So I don’t know where the drum stuff came from. Just a natural thing I guess lol

I get pretty autistic with the drums though. I like to layer foley sounds over the drum hits to add texture. Most of my snare drums have recordings of bacon cooking in a pan layered over them for instance lol

https://youtu.be/SV3lgJeTWMw

This is the type of music that inspires the music I make https://youtu.be/MdqxQRy_dNI

https://soundcloud.com/brimstonmusic/real-love

https://youtu.be/vTs7KXqZRmA

Can’t help but notice that the producers are all white men 😂

https://soundcloud.com/envian/song1-2018-4/s-I8jNs

sounds a bit better now 😃

I’m still working on my chest... with the cold weather and my unheated garage it’s pretty much still at the same point it was when I last posted 😂

I got some hard wood flooring for 1$ a box from my work and I plan to just square it off and use the hard wood for some nightstands too but not until it heats up a bit.

Does anyone know a good place to get 2x2 lumber that is furniture grade? I am making a dresser for my gf and for now my only idea is to take 2x4s and rip them down, but if possible to get really good lumber I’d be willing to just buy it.

It’s so cold in my garage that I’m not trying to spend time out there ripping down 2x4s 😂

It looks like maybe Home Depot has square edge white wood 2x2s so nvm I’ll go check that out