Message from @RevStench
Discord ID: 509871249606836250
@RevStench ky ie chapter house? We need that place.
Haha I wish. It's a beautiful place, has a private parking lot, a wall haha. 4 stories and a massive cellar that doesn't get wet. Hahaha it would be perfect.
I love these little windows. 9in Knock off Klein's haha for size.
Anyone here know anything about repairing roof leaks? It's raining hard where I live and rain is leaking through roof by the chimney.
It's the flashing. When it drys out get up there with some metal sealant and some matching color trim screws and nail it in the mortar. Use a lot of sealant, smear it around.
It could be the flashing, you'll have to look at it. But if it's coming in at the chimney it's most likely the flashing.
@Rick if you get up there get some pics if you have any questions.
I sent you a response in the general channel, but I missed the part about the chimney. The sealant should still work though and then like rev said you should take a look at the metal flashing. @Rick
They didn’t post in order 😓
“How I took apart a coat hanger”
Gotta work with your hands sometimes. Great job
Here's some custom casement windows I made. They still need to be cleaned.
We're also restoring a 1972 Airstream camper.
Here's a little shelf for the bathroom.
Ooh that looks nice. What kind of finish do you like to use? I’ve been using a matte polyurethane. I plan to make two matching nightstands sometime soon as well as a chest that sits at the end of the bed. I want to give them a glossy finish, so I won’t be using the poly (don’t like the way glossy poly looks). Any suggestions?
I used Helmsman water based poly on that, it's not real glossy but you can see it.
Usually I use high gloss poly because it protects better. And people like that high gloss look.
I hate working on homemade scaffolding.
Especially in a proper turret.
It's only a little over 20ft, but falling would hurt hahaha
A pretty large chest I made to sit at the bottom of my bed. Should look really nice when I stain /finish it
The hinges for the lid and the handles haven’t arrived yet either, but I found some really nice hinges hat allow the lid to over hang on the back
Looks nice bro. If you're ever looking for hardware here's where I buy a lot of stuff from.
https://www.houseofantiquehardware.com
Nice they have some cool bail pulls on there. Wish I would have known before I bought the ones I did so I could have more choices. Either way the ones I got are fine though I guess.
Haha you could always swap it out later. Nice work though bro.
Thank you.
That’s true. I’ll see how it looks before I install it and return it if I don’t like it
@Envian Nice work. Post photos after you stain it please, they always look so good after being stained.
Here’s my latest project. Just a simple stand for my desk
Building some custom windows and frames for a place in Jeffersonville, Indiana.
Well those didn't go in order hahah