Message from @MAC21500
Discord ID: 522590246039453707
It’s not. It’s a $99 dollar single shot from Walmart.
Saw that bitch off and thread in a sight
Get a machinist to do the sight if you cannot
Or leave it
I don’t know any machinists. Some of the sporting goods stores have clip on fiber optic sights I might mod on in the mean time.
Epoxy bb to top
JB weld
silver solder it
Just use one of the neon colored clear .12 gram airsoft bb's
No. Ima do it right.
>Do it right
>on a $99 single shot
Gorilla gluing a BB to the rib is about as right as it gets on those
Hack saw
I’d do it now if there was a vice in the house. Two hacksaws, no vice. Not sure where the files are so I’ll have to use the SAK for that. No emery cloth.
sit on it and hacksaw the barrel off
no vice reqd
Alright. Fuck it.
Uh. A vice would help a lot.
Also, a file to clean it up after
There are plenty of fiber bead sights that have double stick tape.
Fuck this I’m going to get a vice and an angle grinder.
So, the barrel is off, but i have significant filing to do.
You need a vice and a file.
And work it gently.
You don't know any machinists? Okay. What you can do is contact a shop you find and they can easily thread in a post sight.
Where my Sata nigga at, I am supposed to make him some new grips
That’s also me. Ended up taking a saw to it again. Got a good cut with minimal hiccups. Filing and sanding are next.
Real shit harbor freight tap and a drill
Eh. I’d rather sand. Gives me more control. Almost finished anyway.
When you go for the new bead
Eventually.
Like I said, plenty of fiber beads that stick on with double stick tape. No need to tap. I’ve had one that’s going on 3 years of hard competition use.
JB weld
I think I’ll just go with the tape like moonrunes said.
Just make sure you clean the rib with alcohol before you apply the sight
Alright.
Ooh purty
Thanks.
@Deleted User you were wanting to talk grips?
Yeah, if you still need new grips