Message from @RoflTank

Discord ID: 514904709967118357


2018-11-21 20:44:08 UTC  

I doubt 8mm Mauser and 7.62x51 nato are compatible

2018-11-21 20:44:09 UTC  

Receiver would require a stretch along with new mags, bolt head, and a number of issues

2018-11-21 20:44:11 UTC  

Just do an 8mm mauser with roller-delayed blowback from the ground up.

2018-11-21 20:44:17 UTC  

You'll stay sane longer.

2018-11-21 20:44:18 UTC  

^^

2018-11-21 20:44:28 UTC  

Build a SLR-6

2018-11-21 20:44:32 UTC  

Also wtf is that SKS

2018-11-21 20:44:36 UTC  

Actually they're VERY close

2018-11-21 20:44:46 UTC  

Ban bubba's from owning guns now lmao

2018-11-21 20:44:53 UTC  

That shorty SKS makes my peepee hard but it's a guilty boner

2018-11-21 20:45:04 UTC  

It looks retarded lol

2018-11-21 20:45:13 UTC  

Maybe that's why you like it fire

2018-11-21 20:45:47 UTC  

Fuck you it's cool. I've never seen that before and it seems about as tasteful as a bubba'd rifle can be.

2018-11-21 20:46:05 UTC  

🅱️urris

https://cdn.discordapp.com/attachments/483396318111465482/514904355598499850/image0.jpg

2018-11-21 20:46:08 UTC  

So the Masuer shoulder is 1mm thinner, the base is 0.04mm wider, rim is 0.05mm thinner, and the rim thickness is the same

2018-11-21 20:46:11 UTC  

Would've kept the original stock myself

2018-11-21 20:46:50 UTC  

So you'd need to slightly mill out the NATO chamber and then basically fit a washer in it.

2018-11-21 20:46:57 UTC  

Rofl please don't start scraping metal out of a CETME action.

2018-11-21 20:47:06 UTC  

It'd be ezpz

2018-11-21 20:47:13 UTC  

I could get a C308

2018-11-21 20:47:29 UTC  

Test it on something cheap like that

2018-11-21 20:47:34 UTC  

Barbarossa was supposed to be easy too Rofl but we know how that went don't we?

2018-11-21 20:48:00 UTC  

"Muh rotten house"

2018-11-21 20:48:05 UTC  

Like you could literally just stick some quality weld material in there, then lathe it down to 1mm thickness

2018-11-21 20:48:06 UTC  

"Kick da door in hurr"

2018-11-21 20:48:28 UTC  

Then do a slight milling of the base section to fit the slightly THICCer Masuer round

2018-11-21 20:48:47 UTC  

Adjust headspacing for the bolt should be fairly easy

2018-11-21 20:48:52 UTC  

To quote @nbp;
Are you defective?*

2018-11-21 20:49:22 UTC  

It's literally the easiest set of modifications to make a 7.62 NATO rifle compatible with 7.92 Mauser

2018-11-21 20:49:48 UTC  

To the point where I wonder why NATO doesn't just adopt the significantly superior 7.92 round over 7.62x51

2018-11-21 20:50:36 UTC  

M88 you sound like a bit of a Wehraboo. How is the 8mm Mauser superior to 7.62x51?

2018-11-21 20:51:13 UTC  

.280 gucci gang

2018-11-21 20:51:33 UTC  

#7.92x40 CETME gang

2018-11-21 20:51:34 UTC  

Ok retard

2018-11-21 20:51:45 UTC  

7.92 is heavier, faster, and has a flatter trajectory and higher velocity over significantly longer ranges

2018-11-21 20:51:58 UTC  

.300 WIN MAG GANG

2018-11-21 20:52:03 UTC  

In fact 7.92x57 is one of the few rounds that retains supersonic velocity over 1km

2018-11-21 20:52:05 UTC  

.280 would have been a better choice than 7.62x51 as the NATO standard.

2018-11-21 20:52:06 UTC  

FALKOR PETRA GVNG

2018-11-21 20:52:16 UTC  

^

2018-11-21 20:52:39 UTC  

On another note, might order a MDR for Christmas