Message from @RollerDelayedSabot
Discord ID: 514905735281377281
Fuck you it's cool. I've never seen that before and it seems about as tasteful as a bubba'd rifle can be.
🅱️urris
So the Masuer shoulder is 1mm thinner, the base is 0.04mm wider, rim is 0.05mm thinner, and the rim thickness is the same
Would've kept the original stock myself
So you'd need to slightly mill out the NATO chamber and then basically fit a washer in it.
Rofl please don't start scraping metal out of a CETME action.
It'd be ezpz
I could get a C308
Test it on something cheap like that
Barbarossa was supposed to be easy too Rofl but we know how that went don't we?
"Muh rotten house"
Like you could literally just stick some quality weld material in there, then lathe it down to 1mm thickness
"Kick da door in hurr"
Then do a slight milling of the base section to fit the slightly THICCer Masuer round
Adjust headspacing for the bolt should be fairly easy
To quote @nbp;
Are you defective?*
It's literally the easiest set of modifications to make a 7.62 NATO rifle compatible with 7.92 Mauser
To the point where I wonder why NATO doesn't just adopt the significantly superior 7.92 round over 7.62x51
M88 you sound like a bit of a Wehraboo. How is the 8mm Mauser superior to 7.62x51?
.280 gucci gang
Ok retard
7.92 is heavier, faster, and has a flatter trajectory and higher velocity over significantly longer ranges
.300 WIN MAG GANG
In fact 7.92x57 is one of the few rounds that retains supersonic velocity over 1km
.280 would have been a better choice than 7.62x51 as the NATO standard.
FALKOR PETRA GVNG
^
On another note, might order a MDR for Christmas
If you ain't using a semi auto .300magnum, your shoulders and or pockets are weak, and won't survive the Kali Yuga
🅱️ullpup 🅱️oi
Nice
Not a magic bullet but a good compromise between 5.56x45 and 7.62x51.
Fuck 6.5 creedmore
Gayest caliber
Literally the .40 of rifles
You can't weld a section into a barrel you absolute tard
If you’re not carrying .45 Super in a USP or MK23 gtfo
I dunno enough about it to comment
If you put something you welded in my lathe I will throw actual shit at you
>not carrying a sig