Message from @RoflTank
Discord ID: 514903985258364969
Don’t forget the original StG 🅱️oi here
The thought of getting a CETME/G3 clone chambered in 7.92x57 and then dressing it up like an StG makes my pp hard
It’s 5.56
Why are you like this
Rofl
But $300 for a custom 7.92 barrel makes my pp not as hard
You have autismo
Just get the HMG Gunworks reproduction STG
Better than a fucking Frankenstein CETME
And the G3 would need a total redesign for 8mm
Adjusting the headspacing shouldn't be hard, then it's a matter of whether you can shove 57 Mauser in a 51 NATO chamber
I doubt it
I doubt 8mm Mauser and 7.62x51 nato are compatible
Receiver would require a stretch along with new mags, bolt head, and a number of issues
Just do an 8mm mauser with roller-delayed blowback from the ground up.
You'll stay sane longer.
^^
Build a SLR-6
Also wtf is that SKS
Ban bubba's from owning guns now lmao
That shorty SKS makes my peepee hard but it's a guilty boner
It looks retarded lol
Maybe that's why you like it fire
Fuck you it's cool. I've never seen that before and it seems about as tasteful as a bubba'd rifle can be.
🅱️urris
So the Masuer shoulder is 1mm thinner, the base is 0.04mm wider, rim is 0.05mm thinner, and the rim thickness is the same
Would've kept the original stock myself
So you'd need to slightly mill out the NATO chamber and then basically fit a washer in it.
Rofl please don't start scraping metal out of a CETME action.
It'd be ezpz
I could get a C308
Test it on something cheap like that
Barbarossa was supposed to be easy too Rofl but we know how that went don't we?
"Muh rotten house"
Like you could literally just stick some quality weld material in there, then lathe it down to 1mm thickness
"Kick da door in hurr"
Then do a slight milling of the base section to fit the slightly THICCer Masuer round
Adjust headspacing for the bolt should be fairly easy
To quote @nbp;
Are you defective?*