You have autismo

Just get the HMG Gunworks reproduction STG

Better than a fucking Frankenstein CETME

And the G3 would need a total redesign for 8mm

Adjusting the headspacing shouldn't be hard, then it's a matter of whether you can shove 57 Mauser in a 51 NATO chamber

I doubt it

I doubt 8mm Mauser and 7.62x51 nato are compatible

Receiver would require a stretch along with new mags, bolt head, and a number of issues

Just do an 8mm mauser with roller-delayed blowback from the ground up.

You'll stay sane longer.

^^

Build a SLR-6

Also wtf is that SKS

Actually they're VERY close

Ban bubba's from owning guns now lmao

That shorty SKS makes my peepee hard but it's a guilty boner

It looks retarded lol

Maybe that's why you like it fire

Fuck you it's cool. I've never seen that before and it seems about as tasteful as a bubba'd rifle can be.

🅱️urris

So the Masuer shoulder is 1mm thinner, the base is 0.04mm wider, rim is 0.05mm thinner, and the rim thickness is the same

Would've kept the original stock myself

So you'd need to slightly mill out the NATO chamber and then basically fit a washer in it.

Rofl please don't start scraping metal out of a CETME action.

It'd be ezpz

I could get a C308

Test it on something cheap like that

Barbarossa was supposed to be easy too Rofl but we know how that went don't we?

"Muh rotten house"

Like you could literally just stick some quality weld material in there, then lathe it down to 1mm thickness

"Kick da door in hurr"

Then do a slight milling of the base section to fit the slightly THICCer Masuer round

Adjust headspacing for the bolt should be fairly easy

To quote @nbp;
Are you defective?*

It's literally the easiest set of modifications to make a 7.62 NATO rifle compatible with 7.92 Mauser

To the point where I wonder why NATO doesn't just adopt the significantly superior 7.92 round over 7.62x51

M88 you sound like a bit of a Wehraboo. How is the 8mm Mauser superior to 7.62x51?

.280 gucci gang

#7.92x40 CETME gang

Ok retard