Message from @nbp

Discord ID: 514904101968936971


2018-11-21 20:42:40 UTC  

Why are you like this

2018-11-21 20:42:43 UTC  

Rofl

2018-11-21 20:42:51 UTC  

But $300 for a custom 7.92 barrel makes my pp not as hard

2018-11-21 20:42:53 UTC  

You have autismo

2018-11-21 20:43:13 UTC  

Just get the HMG Gunworks reproduction STG

2018-11-21 20:43:24 UTC  

Better than a fucking Frankenstein CETME

2018-11-21 20:43:28 UTC  

And the G3 would need a total redesign for 8mm

2018-11-21 20:43:28 UTC  

Adjusting the headspacing shouldn't be hard, then it's a matter of whether you can shove 57 Mauser in a 51 NATO chamber

2018-11-21 20:43:35 UTC  

I doubt it

2018-11-21 20:44:03 UTC  

https://cdn.discordapp.com/attachments/483396318111465482/514903847416889345/46443342_331298527652094_240054118834503680_n.png

2018-11-21 20:44:08 UTC  

I doubt 8mm Mauser and 7.62x51 nato are compatible

2018-11-21 20:44:09 UTC  

Receiver would require a stretch along with new mags, bolt head, and a number of issues

2018-11-21 20:44:11 UTC  

Just do an 8mm mauser with roller-delayed blowback from the ground up.

2018-11-21 20:44:17 UTC  

You'll stay sane longer.

2018-11-21 20:44:18 UTC  

^^

2018-11-21 20:44:28 UTC  

Build a SLR-6

2018-11-21 20:44:32 UTC  

Also wtf is that SKS

2018-11-21 20:44:36 UTC  

Actually they're VERY close

2018-11-21 20:44:46 UTC  

Ban bubba's from owning guns now lmao

2018-11-21 20:44:53 UTC  

That shorty SKS makes my peepee hard but it's a guilty boner

2018-11-21 20:45:04 UTC  

It looks retarded lol

2018-11-21 20:45:13 UTC  

Maybe that's why you like it fire

2018-11-21 20:45:47 UTC  

Fuck you it's cool. I've never seen that before and it seems about as tasteful as a bubba'd rifle can be.

2018-11-21 20:46:05 UTC  

🅱️urris

https://cdn.discordapp.com/attachments/483396318111465482/514904355598499850/image0.jpg

2018-11-21 20:46:08 UTC  

So the Masuer shoulder is 1mm thinner, the base is 0.04mm wider, rim is 0.05mm thinner, and the rim thickness is the same

2018-11-21 20:46:11 UTC  

Would've kept the original stock myself

2018-11-21 20:46:50 UTC  

So you'd need to slightly mill out the NATO chamber and then basically fit a washer in it.

2018-11-21 20:46:57 UTC  

Rofl please don't start scraping metal out of a CETME action.

2018-11-21 20:47:06 UTC  

It'd be ezpz

2018-11-21 20:47:13 UTC  

I could get a C308

2018-11-21 20:47:29 UTC  

Test it on something cheap like that

2018-11-21 20:47:34 UTC  

Barbarossa was supposed to be easy too Rofl but we know how that went don't we?

2018-11-21 20:48:00 UTC  

"Muh rotten house"

2018-11-21 20:48:05 UTC  

Like you could literally just stick some quality weld material in there, then lathe it down to 1mm thickness

2018-11-21 20:48:06 UTC  

"Kick da door in hurr"

2018-11-21 20:48:28 UTC  

Then do a slight milling of the base section to fit the slightly THICCer Masuer round

2018-11-21 20:48:47 UTC  

Adjust headspacing for the bolt should be fairly easy

2018-11-21 20:48:52 UTC  

To quote @nbp;
Are you defective?*

2018-11-21 20:49:22 UTC  

It's literally the easiest set of modifications to make a 7.62 NATO rifle compatible with 7.92 Mauser

2018-11-21 20:49:48 UTC  

To the point where I wonder why NATO doesn't just adopt the significantly superior 7.92 round over 7.62x51

2018-11-21 20:50:36 UTC  

M88 you sound like a bit of a Wehraboo. How is the 8mm Mauser superior to 7.62x51?