Message from @502ssOtto

Discord ID: 365527342682210304


2017-10-05 15:42:38 UTC  

Hmmmmmm

2017-10-05 15:43:04 UTC  

https://cdn.discordapp.com/attachments/363104510153064452/365524300381552660/image.png

2017-10-05 15:43:09 UTC  

Offer him 400 see what he says lol

2017-10-05 15:43:36 UTC  

See if he takes EBT

2017-10-05 15:43:39 UTC  

Why does he have an arm brace if he has the 6" comp?

2017-10-05 15:44:05 UTC  

No pin and weld?

2017-10-05 15:46:00 UTC  

Also remember that .300blk is about $0.75-$1 a shot

2017-10-05 15:50:27 UTC  

I really want a VZ58 or a cheap good ak

2017-10-05 15:50:42 UTC  

Vz is expensive as fuck though

2017-10-05 15:50:49 UTC  

Get a parts kit and a receiver and come visit

2017-10-05 15:51:06 UTC  

We will drink beer and I'll show you how to rivet

2017-10-05 15:51:36 UTC  

Romanian with a decent barrel installed would be cheapest

2017-10-05 15:51:48 UTC  

I'd recommend Polish

2017-10-05 15:51:50 UTC  

Sweet what do i look up just piece by piece ?

2017-10-05 15:52:03 UTC  

nah hold on I'll send a link

2017-10-05 15:52:33 UTC  

@SonderSchutz TX I'll get you a basic overview of the gear list after work.

2017-10-05 15:53:22 UTC  

Get one with a installed and headspaced barrel

2017-10-05 15:54:01 UTC  

Then you will need a receiver from nodak spud, Atlantic firearms, or Waffen Werke

2017-10-05 15:54:40 UTC  

If you are going to replace the stock anyway I would go with a WBP Polish kit

2017-10-05 15:55:09 UTC  

They offer them with original cold hammer forged chrome lined barrel

2017-10-05 15:56:21 UTC  

Like this?

2017-10-05 15:56:27 UTC  

No barrel on that one

2017-10-05 15:56:34 UTC  

You want a 5.45?

2017-10-05 15:56:54 UTC  

Yes or 7.62

2017-10-05 15:57:25 UTC  

This is the 7.62 WBP with barrel installed and beryl optics rail

2017-10-05 15:58:50 UTC  

How cheap are you trying to keep this?

2017-10-05 15:59:54 UTC  

500 or less if possible

2017-10-05 16:00:19 UTC  

A vz-58 uses a milled receiver

2017-10-05 16:00:45 UTC  

The barrel would need to be populated in a alignment jig and headspaced

2017-10-05 16:01:53 UTC  

Fuck

2017-10-05 16:02:25 UTC  

Ehh ak would be easier

2017-10-05 16:03:10 UTC  

That plus a $50 receiver from Atlantic firearms and a AKM rivet set

2017-10-05 16:04:37 UTC  

Hell yeah ill start savin up

2017-10-05 16:05:16 UTC  

Back in 06 those parts kits were $250 or less

2017-10-05 16:05:24 UTC  

With the factory barrels still in them

2017-10-05 16:07:16 UTC  

Damn i missed out