Optics can get expensive af

Hmmmmmm

Offer him 400 see what he says lol

See if he takes EBT

Why does he have an arm brace if he has the 6" comp?

No pin and weld?

Also remember that .300blk is about $0.75-$1 a shot

I really want a VZ58 or a cheap good ak

Vz is expensive as fuck though

Get a parts kit and a receiver and come visit

We will drink beer and I'll show you how to rivet

Romanian with a decent barrel installed would be cheapest

I'd recommend Polish

Sweet what do i look up just piece by piece ?

nah hold on I'll send a link

@SonderSchutz TX I'll get you a basic overview of the gear list after work.

http://armsofamerica.com/partskits-2.aspx

Get one with a installed and headspaced barrel

Then you will need a receiver from nodak spud, Atlantic firearms, or Waffen Werke

If you are going to replace the stock anyway I would go with a WBP Polish kit

They offer them with original cold hammer forged chrome lined barrel

http://armsofamerica.com/polishtantalwz88partsetwithsidefolderstockandaccessories-1-2.aspx

Like this?

No barrel on that one

You want a 5.45?

Yes or 7.62

This is the 7.62 WBP with barrel installed and beryl optics rail

http://armsofamerica.com/headspacedpolishforgedmodelwbpakm-47sporterreplacementkit762x39calwpolishmilitaryberylpicatinnyrails.aspx

How cheap are you trying to keep this?

https://www.apexgunparts.com/rifles/vz-58/czech-vz58-v-folding-stock-parts-kit-w-original-barrel-7-62x39.html

500 or less if possible

A vz-58 uses a milled receiver

The barrel would need to be populated in a alignment jig and headspaced

Fuck

Ehh ak would be easier

http://armsofamerica.com/romanianmilitarymodel1975akm47partskitnobarrel-1-1-1.aspx

That plus a $50 receiver from Atlantic firearms and a AKM rivet set

Hell yeah ill start savin up

Back in 06 those parts kits were $250 or less

With the factory barrels still in them