Message from @nbp
Discord ID: 514906091931303936
Like you could literally just stick some quality weld material in there, then lathe it down to 1mm thickness
"Kick da door in hurr"
Then do a slight milling of the base section to fit the slightly THICCer Masuer round
Adjust headspacing for the bolt should be fairly easy
To quote @nbp;
Are you defective?*
It's literally the easiest set of modifications to make a 7.62 NATO rifle compatible with 7.92 Mauser
To the point where I wonder why NATO doesn't just adopt the significantly superior 7.92 round over 7.62x51
M88 you sound like a bit of a Wehraboo. How is the 8mm Mauser superior to 7.62x51?
.280 gucci gang
#7.92x40 CETME gang
Ok retard
7.92 is heavier, faster, and has a flatter trajectory and higher velocity over significantly longer ranges
.300 WIN MAG GANG
In fact 7.92x57 is one of the few rounds that retains supersonic velocity over 1km
.280 would have been a better choice than 7.62x51 as the NATO standard.
FALKOR PETRA GVNG
^
On another note, might order a MDR for Christmas
If you ain't using a semi auto .300magnum, your shoulders and or pockets are weak, and won't survive the Kali Yuga
🅱️ullpup 🅱️oi
Not a magic bullet but a good compromise between 5.56x45 and 7.62x51.
Fuck 6.5 creedmore
Gayest caliber
Literally the .40 of rifles
You can't weld a section into a barrel you absolute tard
If you’re not carrying .45 Super in a USP or MK23 gtfo
I dunno enough about it to comment
If you put something you welded in my lathe I will throw actual shit at you
>not carrying a sig
What are you poor
Cock Voring God is literally just an AR/AK fudd
Just make a new fucking barrel you mong
^^^
The barrel isn't the problem it's the chamber
The problem is your idea
You dense cunt
The barrel is entirely the problem
@RoflTank please god just build a new rifle
We're talking about a bore diameter that falls greatly short of the safe outer diameter