Message from @Stubbs
Discord ID: 514909722072186881
Don't weld washers to a chamber you mong
How about a .960 Rowland SP89
If only people would work for your approval
Keep them here
Washer was a visual reference
I bet you think chrome lined bores are more accurate too
The actual idea would be akin to fusing metal and then lathing down
@Deleted User They're going down there like Somalians to Sverige
AHHH
Chromium bore is only useful for corrosion resistance
That would be up though, yeet
Like up Swedish wamen skirt
I'm down for some Swedish upskirt action
Also, IIRC, chromium plated barrels can withstand higher pressures for longer, which is why tank barrels utilize it with ridiculously hot service loads.
Wish plate carrier came in
While you could weld in sections to make a cetme style action longer, you would also need a new bolt head in the least, and a new barrel
Real nigga hours, converting a normal firearm down to a black powder
A heavier set of rollers is a given
Get in VC fags
Already have the barrel, and the bolt head could be modified if what I remember of the CETME/G3 bolt is true.
Do not ream out a 7.62 bolt head
The cartridges base dimensions are too far to modify
It's... actually 0.05mm shorter on the Masuer
That's not the problem, it's the engagement
Thickness is the same too
Also if you're going to even try this get good at welding
This is more of a "lmao I want to see if I can"
Than actually using it
Put a Yugo Mg barrel in it
And turn it down for an hk21 adjustable gas block
Fucking frankengun
gonna be great
Wait what the fuck am I doing.
If I actually wanted to make this for serious I'd just make the entire thing from scratch
Just put an mg42 bolt in it
MG42 bolt on a rifle why god
That's the actually retarded size roller action you'd need to handle 8mm
I mean you could
With a fixed stock
Just do what the 42 did and have the recoil spring go basically all the way down it