And the chamber being modified to accept 8mm Mauser Rofl. And probably the magazines.

>welding
>Washer
>Chamber

All of these are no

lmao do you metallurgy

This is the wrong channel at any rate

<#508382218612375565>

As an engineering major I have to do metallurgy so I don't approve dumb shit

You should really rethink your major then

Don't send them down there

I'm talking about some autistic guns

Don't weld washers to a chamber you mong

How about a .960 Rowland SP89

If only people would work for your approval

Keep them here

Washer was a visual reference

I bet you think chrome lined bores are more accurate too

The actual idea would be akin to fusing metal and then lathing down

@Deleted User They're going down there like Somalians to Sverige

AHHH

Chromium bore is only useful for corrosion resistance

That would be up though, yeet

Like up Swedish wamen skirt

I'm down for some Swedish upskirt action

Also, IIRC, chromium plated barrels can withstand higher pressures for longer, which is why tank barrels utilize it with ridiculously hot service loads.

Wish plate carrier came in

While you could weld in sections to make a cetme style action longer, you would also need a new bolt head in the least, and a new barrel

Real nigga hours, converting a normal firearm down to a black powder

A heavier set of rollers is a given

Get in VC fags

Already have the barrel, and the bolt head could be modified if what I remember of the CETME/G3 bolt is true.

Which is all proprietary tooling

Do not ream out a 7.62 bolt head

The cartridges base dimensions are too far to modify

It's... actually 0.05mm shorter on the Masuer

That's not the problem, it's the engagement

Thickness is the same too

Also if you're going to even try this get good at welding

This is more of a "lmao I want to see if I can"

Than actually using it

Put a Yugo Mg barrel in it

And turn it down for an hk21 adjustable gas block