Message from @RoflTank
Discord ID: 514910798032928784
Wish plate carrier came in
While you could weld in sections to make a cetme style action longer, you would also need a new bolt head in the least, and a new barrel
Real nigga hours, converting a normal firearm down to a black powder
A heavier set of rollers is a given
Get in VC fags
Already have the barrel, and the bolt head could be modified if what I remember of the CETME/G3 bolt is true.
Which is all proprietary tooling
Do not ream out a 7.62 bolt head
The cartridges base dimensions are too far to modify
It's... actually 0.05mm shorter on the Masuer
That's not the problem, it's the engagement
Thickness is the same too
Also if you're going to even try this get good at welding
This is more of a "lmao I want to see if I can"
Than actually using it
Put a Yugo Mg barrel in it
And turn it down for an hk21 adjustable gas block
Fucking frankengun
gonna be great
Wait what the fuck am I doing.
Just put an mg42 bolt in it
MG42 bolt on a rifle why god
That's the actually retarded size roller action you'd need to handle 8mm
I mean you could
With a fixed stock
Just do what the 42 did and have the recoil spring go basically all the way down it
For real though, the fg42 bolt would be less retarded
But still pretty retarded
The FG42 bolt is weird tho
It's the smallest you can get an 8mm
Because it's meant for full/semi toggle
Smg guns makes them
If you shit gold that is
Yeah but again, side loading bolt designed to switch from open to closed bolt on full and semi respectively
It's not bad but it's purpose built
Unless you get a weird SAW box mag that feeds from the side but attaches and hangs like a normal magazine
Maybe you should just not design anything ever
Learn GD&T
Dabble and [dab] in Solidworks
I designed a 3d printable Skorpion lower that uses ar15 parts