Message from @totally not Cthulhu 🐙
Discord ID: 530763557600624641
Phones gonna be triggering trypophobia soon
i mean most modern vidya cards support plenty of displays
you can buy a low end gpu to push like 6 displays if youre not doing gaming or 3d
also one displayport can be daisychained to multiple monitors
@Windatica I assume my cards fine with a shitton of displays, but just wanted to confirm
Also I'm just super sleep deprived today and not really thinking great, because there's no way my card wouldn't do at least 4
Back then nothing
These days check gpus specs if nothing else
@Windatica @timsandtoms it's really not a problem anymore. These days most gpus support more screens. I was talking about 10+ years ago
it not about no. of screen, it about max screen res
display port wasn't available on low/mid gpus back then, so, if the gpu had only two connectors, there was nothing you could do
Also if it had a VGA connector + 2 digital ones, using the VGA connector would usually disable one of the digital connectors
would any of you happen to have experience with yocto
Can anybody help me quick? I've seen you can only go MAX at 1/2 of untwisted wire on cat5. Going longer than that will kill my comms completely or will I just lose so many feet of communication?
can you rephrase that in english
what's a MAX at 1/2 of untwisted
max what
ye
discord didnt scroll :(((
Max length of untwisted wire in cat5
So I got cable coming out of a switch, going to a another switch. From there it runs 250ft to a piece of equipment.
why is it untwisted
250 feet, yikes
also, 250ft of untwisted?
why
you're not going to make 250ft with shitty untwisted cable
inb4 it's CCA too
So this box doesn't have communications. You can see the untwisted wires
it's untwisted because it's outside of the cable
judging by the cable it was twisted at one point
This box I have comms. You can see the wires twisted up to the solder cups
so the entire cable probably is
look at the mantle, does it say UTP on it
The 250 is twisted. Almost everything is twisted, except for the box that had the insulation pulled back to solder the cat5 to the cups.
it'll probably do 100mbit
So like 3-4inches of untwisted wire. Didn't know if that was enough to fuck up communication
10mbit if you really fucked it up
just try it
why are you only using two pairs
Oh I am. The shits also engineered really dumb. The piece of equipment goes rs232-485 then back to 232 to a 232-ethernet converter.