Message from @The Scribe
Discord ID: 642745764375691274
biodegradable in home construction means the home gets less in value every yr since it's built and it's a mold magnet
I have electronic free rooms
And store it with books
well theres electronics in every room here.....fortunately it's mostly scrap
5G will penetrate most walls
Hmm I could just Aircrete around a couple of shipping containers
that's why they have it so close to the houses
They plan to put 5G towers every 2 houses
Damn!
styrofoam is better insulator
that's the only way 5G can get a clear picture into every house in america
u do know they can setup 5g every 2 houses and have both houses pay for the power bill for it
They sell a paint in Germany that can block signals, but it only works for 4G
works up to 18Ghz, and 5G is 300Ghz
If it works for 4G it will work for 5G
get iron shingles and or solar panels
it doesn't
it will block a lot of it
but enough will get through
real metal blocks real signals but only if it's seamless
People have already tested the paint on 5G, and it gets through
thinking of reinsulating my room here..but go with extra layer of foil backed foam
blocks 4G perfectly though
the mesh only blocks 4g and lower, just so u know
5-6g will go thru it like open air
Yeah need sheet 1/2 inch thick to block up to 1Thz
of iron or lead
Earlier Homes were insulated with a Metal Foil Fiberglass Insulation. Pre-1980's Homes. After the advent of cell phones they switched to Paper backed. It's a Faraday cage!
heavy metal stones will block it also just so it's a 1-2 feet thick
those early homes also had lead paint
Yeah
I’m looking at doing and ICF home. Adding some sort of extra shielding
Lead paint not as affective but better than nothing
lead paint had some uses but it didn't have long term coating insurance unfortunately
The higher the frequency the easier it gets to block. When I started wireless it was in the 850MHz range and signal was better than it is today. We could shoot a T1 30 miles at that frequency with $500 worth of equipment.
works only up to 18Ghz they say on the site
Rusty Metal Paint will work. It's red and Iron Based.