Double action only, no single action option with incased hammers

Encased*

@grumpcat911 since u are awake lol do you know if I replace a 5 position buffer tube (micro) for a AR15 buffer tube, is the spring going to affect me? I do not see caliber mentioned with buffer tube springs

It is for a 9mm carbine

I don’t think so but I’m not exactly the best with modifications. That and it’s a little hard for me ya gain much knowledge since I’m a Californian. XD

@grumpcat911 gotcha no problem. I assume it probably does not matter since the springs are no caliber specific. The diameter of the carbine buffer tube & Ar15 are the same, so i know i can swap them out. Only thing I was worried about is if the spring would be an issue. I emailed cmmg customer service tho, ill find out tomorrow, i just wanted to place the order lol

👌 good luck on that.

Thanks!

Its doesn't matter...AR15 springs have no effect on calibers.

Its common to “tune” a rifle by changing the buffer, different spring rates are another place where you have choices. Most aftermarket springs use a spring tension weight

@HUNTER4639 @Odb 👆

I see. Thanks much

Opps

I meant to tag another person too oh well

They'll see

You'll need a Carbine style buffer

@Aperfectghost thanks, I’ll go ahead an place an order then. I hate how small the micro buffer tube is

https://ar15discounts.com/products/nbs-mil-spec-carbine-buffer-kit-w-h2-heavy-buffer/
@Aperfectghost
Is this okay?

JP Silent Captured Spring

Check that product out

After ur build

That is an expensive spring lol

Yes to answer your question Odb, a heavy buffer is good because it, a 9mm AR is a blowback system

Yeah its expensive but you can swap it between your ARs

@Aperfectghost hmm maybe in the future. I don’t seem to need it rn, My DDM4V7 Pro has no recoil. I assume that is the purpose of that primo spring

I like the suggestion, did not even know that existed

https://www.opticsplanet.com/luth-ar-9mm-carbine-buffer-assembly-commercial.html

Heres a good option as well 👆 @Odb

This is coolest AR build I've done, it's a side folder with a quick attach dolos system

I have a jp on my rifle lower, it is smooth.. very much like it

@Aperfectghost you know if I put a rifle length buffer on my 20" 6.5 if it would cycle ok?

It's in my go bag

With my cz p07

Using a mid length buffer and it ejects around 2-3 o'clock

I think it would work

https://www.arbuildjunkie.com/choosing-the-right-buffer-for-your-ar-15/

Heres a good website for help with buffer

Issues

im here with the obligatory "are those nerf darts?"

Heavy 5oz nerf darts