Message from @Aperfectghost
Discord ID: 762918145454243872
Opps
I meant to tag another person too oh well
They'll see
You'll need a Carbine style buffer
@Aperfectghost thanks, I’ll go ahead an place an order then. I hate how small the micro buffer tube is
JP Silent Captured Spring
Check that product out
After ur build
That is an expensive spring lol
Yes to answer your question Odb, a heavy buffer is good because it, a 9mm AR is a blowback system
Yeah its expensive but you can swap it between your ARs
@Aperfectghost hmm maybe in the future. I don’t seem to need it rn, My DDM4V7 Pro has no recoil. I assume that is the purpose of that primo spring
I like the suggestion, did not even know that existed
Heres a good option as well 👆 @Odb
This is coolest AR build I've done, it's a side folder with a quick attach dolos system
I have a jp on my rifle lower, it is smooth.. very much like it
@Aperfectghost you know if I put a rifle length buffer on my 20" 6.5 if it would cycle ok?
With my cz p07
Using a mid length buffer and it ejects around 2-3 o'clock
I think it would work
Heres a good website for help with buffer
Issues
im here with the obligatory "are those nerf darts?"
Heavy 5oz nerf darts
Some 8oz
Crossbow that shoots buffers <:thinking:726878987837636698>
yes
I think I need some range time..its been a bit and I need to throw a few .50s down range
@Aperfectghost I did a little more research and saw that h2 might not be heavy enough, I think im going with Aero precision ar15 carbine buffer tube kit H3.
Did u see the other one I suggested
Yeah that is what lead me to do more research, it said 5.3 oz and H2 was only 4 oz or something like that. H3 is 5.4 so it should do the job.
9mm specific is 5.3 from what I saw
And the H3 offers 5.4 oz
I Think my AR9 uses a H3 , it does fine
“A carbine length 9mm buffer is the same length as a std. or H/H2/H3 weight carbine buffer. The 9mm and H3 buffers are essentially the same weight and would be interchangeable - the only difference is that the 9mm buffer is a 2-piece style to combat bolt bounce whereas the H3 uses internal weights to combat bolt bounce. (see picture above - 9mm on left, H in the middle, std. on the right) I haven't personally compared an H3 with a 9mm buffer in the same gun with the same ammo, so you'd have to do that to see if you can tell any difference. “
So yeah should be fine