Ain’t it funny that all the jew produced guns are used by niggers and sandniggers to kill americans?

They very well do

probably a LARP thread but still quite interesting

@DUBYA DUBYA II the galil is an israeli version of a finnish kalash clone

If I have gun, could I make specialized ammo for long barrels?

Like if I get a 7.62x39 with a 20" barrel, could I load it with a lot of slow burning powder? It would add velocity but the pressure wouldn't rise as fast

I’m not sure how well that would work or how safe it would be, but different calibers are best suited for different barrel lengths, for instance 7.62x39 is better suited for a shorter barrel 8-10.5 in than 5.56 is

Yeah, but usually the ones made for shorter barrels use faster burning powder

Not necessarily true, standard commercial Ammo will work just fine, it’s work to the gas port and piston system that needs to be done to make it work properly

What I meant was that if I could get more power/better ballistics out of a longer barrel by using more of a slower burning smokeless powder

For example if I *only* had 7.62x39 but with a very long barrel, could I load in more of a slow burning powder instead?

now im not a reloader or anything but i dont think that would do much. i mean if you have a slower burning powder that would reduce pressures in the barrel and that would lead to a slower bullet. the faster the powder burns the higher the pressures and the faster the bullet all you would be doing with a fast burning powder and a longer barrel is just coming closer and closer to 100% powder burn as you can

Yeah, but if you put in more powder that's burning slower, the pressures won't exactly actually push the bullet to their limits, higher amounts of slow burning powder could imo give better results than regular ammo

Otherwise everyone would just be using smokeless powder in the form of cotton

The pressures would be the same, but they'd be the same for a much greater distance in the barrel

I mean there’s always +p loads, but that’s usually for handguns, and that’s a 10% powder charge increase, I know there’s also a +p+ or something along those lines and that’s a 15% increase. You have to keep in mind that a lot of people who do this know their guns inside and out and know what signs of stress to look for, the akm platform is already over gassed for reliability sake, if you aren’t careful a multitude of things will happen like the gun could explode, the trunnions could get beat out of place, the barrel could come out of headspace alignment

Hmm

Interesting

But let's say I do know my gun inside out even tho I'm really a nogunz, would it be viable or is it retarded?

Using more powder but it burns slower

Retarded because the risks out weigh what slight benefit you may get from it

And for pistol cartridges and carbines?

Would it be viable?

Depends on what handgun you use

I MEAN CARBINES

jesus

Like a m4?

Pistol cartridge carbines

Ahh I see

You could a few benefits of rifles in it

9mm goes a far distance farther in a 16 in barrel than a 4 in one

But how it stays up ballisticlly idk

Iraqveteran8888 has a vid on it

Hmmm

Thanks

<@&517501273419939849> thoughts?

Reasonable

Not bad

I feel I can knock it down to $425 cause of the drive

But if he’s a dick head about it I’m not gonna fuck with it

Heres to hoping negotiations go well