ew conchiglie

pops

http://www.armslist.com/posts/8287795/tampa-antiques-for-sale--first-firearm-original--fire-stick---fire-lance-

@Innaswamp

i hab da powaar

BY THE POWER OF MAGPUL

What the fuck are those arms

Mr. skelly is that you

Or Mr Roids

So one of my friends got a Spanish Mauser converted to 7.62 for cheap, the local pawn shop has had it for over two years

It's unmolested except for the arsenal conversion and some fucker mounting scope rails on the receiver - too bubba'd for the local milsurp purists, not bubba'd enough for the local retards

They had it at $600 originally, he got it for $250

Came with a Tasco scope

Then he goes and does this shit

Fuckin lmoa

haha chunky technical

RIP Stg.44 charging handle conversion @Sadmin

Just got off the phone with the Century guy who was in charge of the C93 project

“I don’t think it would work very well without some additional engineering work. On the rifle caliber roller delayed blowback guns, the charging handle doesn’t just fold over to be out of the way. As the handle is drawn out from the folded position to the open position it cams back the cocking tube with a huge amount of force, which in turn transfers through the carrier, and pulls the locking block away from the roller and allows them to retract.



If it weren’t for this action the carrier would be very difficult to move to the rear, because instead of simply pulling the weight of the parts and springs to the rear as you would on a lot of other guns (like the STG44, AK, or whatever) you’d be pulling the rollers out of their locking position and then pulling the weight of parts and springs.“

Apparently I’d either have to be Hoopty level of Chad or would have to figure out how to bring the same camming force as the forward handle to the side.

Raifu is getting some Malaysian food

I read that as 7.62 MEATBALL for a second

https://twitter.com/TheEarthIsEpic/status/1039920312710782978

I thought they were shooting at the hurricane at first.

https://www.youtube.com/watch?v=2p4BssH7gCw

That's a beautiful damned rifle

Always loved the odd aesthetics of many French rifles

@Dataman. It would "work". It would be completely pointless and probably would not extract well but not unsafe.

If he wants a bolt action rifle in 7.62x39 they are widely available and it would actually be accurate and have a useable magazine

I have a similar sporterized by someones grandpa rifle. They are perfectly suitable to hunting and target shooting although of course heavier and more delicate (I.e. rust) than modern guns.

Maybe you would need some kind of condom to get the shoulder to fit properly in the chamber since it doesn't grab at the rim

@Detroit Lion How's that stuff shoot? I still have over 1000 rounds of ZQI I bought during the Walmart clearance and a bunch of Hirtenberger, but I'd like something that's not bi-metal (the Hirt is, the ZQI isn't.)

@keldoclock it was a dumbass mistake on his part, he thought the 7.62 on the side meant 7.62x39

@Advicedog I haven't shot it yet. Unfortunately the L2A2 Serp is also Bi-metal.

I thought it was a meme