He fired one shot, the shot that blew his hand off

No bullet, no explosion from barrel obstruction

EXACTLY

West World dun goofed

As long as you don't buy a Taurus Judge, you'll be fine.

The rifles in West World are so sexy

https://www.reddit.com/r/westworld/comments/8tw2p1/explanation_of_mibs_gun_backfire_possible_spoiler/

Yeah, looks like an error

I hope that MIB can get a robotic hand next season

Teddys dead body has a hand that his not gonna need any more

hello

Nice, my fav firearms are the AR57, FN Five-seven, and the Barrett M107A1/M85 (Although the MRADs seem pretty cool, but I have yet to own/use one)

are those your favorite guns on paper, or the favorite guns in your collection?

I don't think the AR57 is practical at all since 5.56 is bigger and better and more cheap.... 5.7 is only practical out of P90s and Five seveNs

I won't admit to what I own on the Internet

The AR57 is strictly for CQC tight corners, etc.

Specifically the SBR model

but why even consider that when the P90 exists

same thing, but even more compact, and that's what 5.7 is made for

No brass left behind, and after using the AR platform in CQC for years, I'm more used to and capable with that platform

Actually the SBR AR57 even with the suppressor is flush and basically the same length

Although getting that bastard back out is a bitch

Also P90 is generally more expensive (not that I care about cost usually)

is it not ridiculously front heavy compared to normal ARs with the magazine on the top front like that?

what do you mean by no brass left behind?

Actually it didn't feel quite off center until it gets the supressor on there

The AR57 captures all brass into the empty magazine

A full 50rd mag will fill up the 30rd under-mag perfectly without affecting functionality

Huh, cool feature

ive never heard of that

Well it puts the now empty mag in the bottom to good use

Yeah, I fell in love with it immediately

I think i'd prefer the brass falling to the ground just to simplify the system and make it more reliable

Well then you can presumably leave the mag off

It doesnt matter if you have the mag in to capture the casings or not. In fact, when you're engaging, its better to cap the brass than be running over it

Especially if you're burning with bump or select fire

you just put a normal 5.56 mag in to catch the 5.7 brass?

Exactly... although you have to take out the spring.. and I usually have to modify the bottom a bit when using PMAGs and a couple other types.

So it's just a mag casing

I color code them to make sure I'm using the correct one

Yes, exactly