Message from @Tervy
Discord ID: 530084286683021322
as long as the board has power it shouldn't be drawing any power from the battery
I mean cr927 can hold bios for yeat if not more if properly implemented
if you can work out the device type you can just rip it open and disconnect the battery
and not bother with this discharge shit
yeah like i said, take the screen off
you probably need a heat gun
look up screen replacement tutorials
out of the dell tabs the smaller ones (venue8pro) doesn't have a BIOS battery but the larger ones (venue11/pro) does
might not even to
depending on the unit
actually since it's dell
can you tell me the service tag?
This reminds mw from story of <certain large hardware manufacturer who definetly does not make weapons too> used bake in pcb coin cells to keep system settings no matter what
Was bicht to reverse engineer
are you sure it's a single frame case, because all videos I find on the internet just pop the rear cover off
Can anyone recommend me a portable dac capable of driving 300 ohm speakers? Got hd600's and /hpg/ is useless
>/hpg/ is useless
When was it ever useful
Just like /mkg/
@totally not Cthulhu 🐙 throw a budget for that
@Tervy for a portable dac? Under 300 would be preferred. Only ones I find aren't in range or not in stock
powerbank + something like schiits Fulla ?
150 usd total if you can find the fulla anywhere
afaik fulla drives itself from usb ?
it would be "portable" but bulky as fuck
makes me wonder if your casual Fiio could drive those cans
Yeah there was a fiio. The e12 Mont Blanc.
A5 can drive up to 300 but I thought you'd want it to be a little higher than the head phone
if tis marked 300 it most likely will be some bit under it
just so 300ohm drivers can drive it as its marked 300
at least most electronics are built like that
dunno accurately incase of dacs/headphones
Creative Sound Blaster E5- yay or nay @Tervy
@totally not Cthulhu 🐙 300 ohm speakers?
oh
you mean headphones
lol
i mean
how loud do you want to go
i could drive hd 600 fine from my phonbe