Message from @timsandtoms
Discord ID: 449002113255604230
<#189467888657235970>
Guys is this the right place to ask for recommendations about an article and link it _
wat
balders is that you?
@Millwood Krytox is top tier, but silicone is great too, unless the light has silicone o-rings
99% of the time it won't, so just get silicone and risk having to replace an o-ring for a dollar or two.
you've regretted buying that mf04 yet?
I went with Krytox GPL-207, the thickest normal grease, but I'm going to keep an eye out for GPL-205 maybe, one of my lights o-rings are finicky and start to bind up, because of thicker grease and a tight fit. Q8 or M43, can't recall.
@bentech Not yet, but I haven't got it yet. I'll probably put a couple sets of batteries through and then flip it if it's popular enough.
haha
Medium range is really the most I can even find space to use, much less what I need for regular life.
lost my earbuds, need some new ones
anyone have recs?
<#365921969004216320>
tbh i wouldn't know why i'd need anymore than a convoy c8
You really dont, you're just upgrading to make things nicer past that.
I have Harbor Freight screw driver bits, always worked great for me, but I've mostly upgraded to individual Wera drivers, they're just nicer to use, but they do the same thing.
Just put 5 volts across them they'll probably work.
or blow up
>putting mains across a light emiting diode
if it starts to smell like spicy egg omelette in your room order a new pair
2-4.5V for the fast flash. I'll give it a whirl.
I need to buy some 18650 sleds.
Any suggestions on neat chink tools that would fit in an Altoids tin? I've got a super useful tiny kit at work, seeing if I can't get more utility in it.
For electronics?
Sorry, nah, I didn't really transition that well
You could add a LED for testing if a small wire is live.
How large is that altoids tin?
Standard Altoids sized
Altoids tins are way larger than I remeber.
The two big ones are 125mm OAL
Found dimensions, 56.9mm X 91.5mm X 21.28mm. Not sure if that's below the lip or at the lip.
Mines a bit smaller, there's a bar magnet holding stuff in, and the thing is coated in flex seal.
It was the fast flash LED. Multimeter continuity check lit it right up.
>knipex
Whoa, there Rockefeller
outdated infographic at the bottom