that's not what I'm hoping for

Your PC just has USB-C connectors on that back and thats it

Everything, on both ends, is USB-C

why

Because

Your monitor?

Just a USB-C connection on the back

imagine

there's displayport for that already

Yeah but displayport can go over USB-C

So why have a separate cable?

but why fix it if it aint borken

Improvement and innovation

If we never fixed what werent broke nothing would improve

@Tervy can you elaborate (or provide a link) for the vbus vconn thing?

hello spaqin how r u

<:hms:311152554618912768> <:aliOK:251417852156837888> <:kms:327934280619655179> 👌

same

i have a final this saturday:):)

for comparison ( rarely met) maximun speeds (optimal scenarios)

usb 2.1 = 480 Mbit / s
usb 3.1 Generation 1 = 5 Gbit/s (very very dependant on the connector and the chip)
usb 3.2 gen 2x2 = 20 Gbit/s (but is not on any device yet far as i know)
sata 3 = 6 Gbit/s
sata 3.2 = 16 Gbit/s
AC-Wireless = 867 Mbit/s (low end devices)
AC-Wireless = 1.68 Gbit/s ( most devices currently (2 antenna AP 160mhz)
AC-Wireless = 6.77 Gbits/s (high end devices)
AY -Wireless = 178 Gbit/s (fucking unicorn magic what should be out 2019)

>gen 2x2

when can we expect this to hit the markets

Wasn't 2.1 480mbit/s?

Also latency vs bandwidth

lemme doublecheck

There was something with 60ghz wifi?

Kek

The one when you turn around and lose all your signal?

WiFi-AD 60GHz

With the advent of WiFi-AD (IEEE 802.11ad), or commonly known as WiGig, the 60GHz band is also used in the WiFi networks. At this frequency, the compatible wireless devices can achieve a data speed up to 8Gbps and its indoor range averages at 60m.

https://twitter.com/hbarra/status/1002177271669518336?s=19

@spaqin my bad fucking mbit/mb transfers

fixed it

Yeeep

I think it's possible to flash occulus go on the Xiaomi vr

Technically it's an android phone <:thvnk:332928260004642827>

@AstroJannah https://en.wikipedia.org/wiki/IEEE_802.11ay

but they are not yet avaiable or ready so

ayy

Hopefully it is going to werk someday