I guess

but it doesnt change the inability to multitask on both OS' at the same time

What specifically do you need to do in linux from a development standpoint?

Are you planning to have two separate dedi boxes? Instead of a KVM switch you could try something called Synergy

https://www.youtube.com/watch?v=9iJTy58PxKk

This gay

Who says my iphone 4 can't be updated above ios 9.3.5

The good news is since the OS is old it's probably more likely to be able to be jailbroken

I just found it yesterday in my drawer I have no idea how to use ios anymore

I use Android now I will spend a thousand dollars on a computer but not a phone

Pretty sure that was back in the good ole days befpre the major update I think ios10? or 11? iOS used to actually be pretty stable back then

now it's riddled with bugs

I think iOS 10 was when SHTF

The fan on my computer is backwards what do i do

Flip it. Might have to remove the front case cover to get to the screws holding it in. The fan cable should not be in the way too

Is that how the stock heat sink and fan came for your cpu?

Should be able to just unscrew them and flip them around if you need to. You will more than likely have remove your front panel but idk your case

Also

Your CPU fan

Is not screwed in in all 4 corners

As in it's not screwed in at all

I looked closer and noticed 😂 mildly surprised that thing hasn’t vibrated its way off

And down to the bottom

Yeah haha

Actually no

It would land on the GPU

Oof

Actually I just checked and the cpu fan is screwed in

On all 4 or just that one?

I have so many questions about that CPU fan rn

It’s screwed in tightly in all four places

The front fan is backwards tho

Still getting good FPS and it doesn’t seem to be throttling too much, but I’d still like to flip it. I held a paper up to the front, and instead of it pushing the paper, it sucked in on the paper

Meaning it’s backwards

I’m just too nervous to flip it

it shouldn't be hard haha

Don't worry about it. Cases are meant to come apart, and require a bit of forceful coercion sometimes. Just remember plastic has it's limits tho

Ok, I’m a Mac guy tho, never owned a pc before in my life until now, but I’ll give it a go

In most cases the plastic front panel is held into the metal frame via tabs. Examine the front area of case from the inside and you may see some tabs you can bend slightly out to release the locking mechanism and then the front panel *should* slide out