"I don't want to spend enough to buy a new gun just to swap optics."
>buy $550 gun
>buy $550 slide to change optics
Brilliant.

Anyone care to explain why the $70 MOS (plus loctite and maybe better screws) isn't a good idea in the face of $500 system?

HOE-VID 19 😫😫

ACHOO‼️🤧🤧What was that⁉️⁉️😏😏Uh-oh 😯 looks like you just got 👀👀 corona virus 😤😜😜

Don’t you know Coronavirus 🦠 🦠 is CUMMING 💦 to America 🇺🇸⁉️🤢🤕🤒🤤 The world 🌍 HOE Organization 🙈👅 is calling HOE-VID19 🗓 a POTENTIAL PANTIE-DEMIC 👄👌👈

No more touching daddy 😩😩 🧓🏼 until you wash 🧽🧽your dirty 🐾nasty 🤢 little 🤞🏼fingers ✋🏻🤚🏻✋🏻🤚🏻for 6️⃣9️⃣ seconds with sHOEp 🧼 and water 💧 👅 otherwise it doesn’t count 🤡🤡🤡

Time to stop 🛑 spreading the germs 🤮🥴🤒and start spreading 😧your legs🤤🦶🏽🦵🏻because everyone 👩‍🦰👨‍🏫🦹🏾‍♂️🧜🏼‍♂️is TWERKING 😈😈from home 🏡

TAG 1️⃣0️⃣ other coronavirus cucks 👉🏾👌🏻otherwise the coronavirus🙀🙀 is cumming for you 🍆🍑🍆

People mostly dislike the MOS because the mount sits too high and the fit with the mounting plates isn’t good with some sights

I already had a gen 4, so cut and coat was only 175

@Red Korvo get an MOS and then save up to get an Agency optics system cut done on it if you’re that price sensitive

Are the Agency plates really that much better?

@All UCP Everything does anyone make better plates? I wouldn't mind getting a slightly more expensive third party MOS plate for a new optic.

Yeah, I think CH precision is the name of the aftermarket plate company

I’m surprised you aren’t doing a p80

I would do a P80, but I want something that has a higher guarantee of reliability. I know P80s are fine but this will be my one gun that has to work, since it will be my CCW. I won't fuck with it either, all the critical parts are staying stock. My AR is pretty damn reliable so at this point it doesn't worry me too much but I figured I should have one weapon that was built and checked by people who do it for a living. My 10/22 was but.... it's a .22 LR. As we all know, that's way too deadly and should be considered a WMD. Too cruel to use that on Jamal.

If select fire was easy to get I would consider a 22lr minigun for my home defense weapon

Select fire is easy to get 😏

I mean like Walmart level of easy to get for a minigun

There are plans for making a 10/22 full auto. Also crank triggers don't qualify as full auto, so go to town.

I don’t give a single fuck about a full auto 22 for home defense unless it is specifically a minigun

22 has awful reliability, you need something with external power for feeding and ejection to make it worth a fuck for home defense

You own a drill don’t you 🤔

Just get a holosun

Same footprint as the rmr

So you can upgrade down the line

Also you’re retarded if you replace the whole slide after you break an optic, which you won’t do unless you’re being a fucking monkey

Probably will but still no point in milling a slide since they're fitted to the optic.

So put another of the same optic on

You don't understand what "fitted to the optic" means then. They measure your specific optic and cut your slide to its tolerances. The fit is nearly perfect. It won't work with other optics.

Let me let you in on a little secret

It fucking will as long as it has the same footprint

Ask me how I know

I’m having an optic milled right now and they definitely don’t do that

Sure but the fit won't be as good or it will be too small.

Bruh

Did you give them your optic @All UCP Everything?

You are like the definition of a dude who reads too much on the internet and has no experience

Optics aren’t hand made artisan products, they’re mass manufactured

There’s going to be so little difference in dimensions that it won’t matter at all

Do they measure each specific aimpoint T2 and fit it to the exact fucking scalarworks mount you use?

>he didn’t pay extra dor the handfitted t2 from scalar

I’ve swapped between several rmrs and they all fit nice and tight in my milled gun

<:GT:665043145150431243>

Feels bad being a poorfag

Is a solution like a unity atom 2.0 or an agency AOS better? Sure but you’re gonna pay for it.