Message from @RoflTank
Discord ID: 513107214584512552
.300 is just 45acp but useful
And probably commit not breath
Only M16A1 should be 20"
Also, 1095STS 10mm carbine only weighs 7lbs, not bad
1095TS
*
What's the comparison between 10mm and .30 carbine assuming the same barrel length?
I mean if you want an even better round go .357 SIG
It's like 10mm Auto but better sectional density.
And slightly better BC
Also, comparing .30 carb and 10mm is apples to oranges.
It's a 7.62x32 against a 10x25, two different rounds for two different guns use din two different roles.
ewww .357 sig
It’s fast as fuck 9mm
It’s good
@FireRising I found test data for 10mm Auto out of different barrels up to 18"
At 18" the best performance was the 135gr @ 1440fps/~980ft-lbs
9x25 Dillon > .357 Sig
In real people units that's 1.38kJ and 439m/s for 10x25 as compared to 606m/s and 1.31kJ for .30 carb
Which is fucking surprising tbh
You'd be looking at like 700m/s and nearly 2kJ a round
at that point, why not just use an intermediate cartridge
7.5FK BRNO is pretty nasty for a pistol cartridge
nearly an intermediate rifle cartridge
Adding 7mm to 10x25 to make it 10x32 would give you another 2.56^3 cm to play with
Err, 2.56 cm^3
Imagine all the extra propellant
11.78 cm^3 total
longboi
10x32 would be a PDW cartridge at that point
A big fucking PDW cartridge
10mm Auto necked down to .357 would be a fucking zoomy boy
that's 9x25 dillon
10mm Auto necked down to 5.56 because G7 ballistics
the .224 valkyrie of handguns
When you need to go F A S T
.224 Boz @RoflTank
5.7mm pls
My plan is to buy a Five-seveN on my 21s, I've already got the good shit for it