Message from @RoflTank

Discord ID: 514907499346919424


2018-11-21 20:55:43 UTC  

The barrel is already 7.92

2018-11-21 20:55:53 UTC  

It's been replaced by a specially made one

2018-11-21 20:56:00 UTC  

>that's fuckin retarded

2018-11-21 20:56:02 UTC  

Try not jumping in halfway through

2018-11-21 20:56:22 UTC  

@Stubbs Shall I fill you in?

2018-11-21 20:56:41 UTC  

Is this retard trying to make a cetme in 8mm kurz into a cetme in 8mm

2018-11-21 20:56:47 UTC  

No

2018-11-21 20:56:49 UTC  

Because that's fucking retarded

2018-11-21 20:56:51 UTC  

lmao no

2018-11-21 20:56:57 UTC  

But probably not as bad as what he actually wants

2018-11-21 20:57:02 UTC  

A 7.62 NATO to 7.92 Masuer

2018-11-21 20:57:05 UTC  

He wants to rechamber one in 7.62x51 to 8mm Mauser

2018-11-21 20:57:06 UTC  

Because if it isn't that it's probably worse

2018-11-21 20:57:27 UTC  

The only real problem is the cartridge length

2018-11-21 20:57:51 UTC  

And the Mauser shoulder being 1mm shorter

2018-11-21 20:57:53 UTC  

The receiver can't accommodate that

2018-11-21 20:58:02 UTC  

The barrel can't accommodate that

2018-11-21 20:58:08 UTC  

The action can't accommodate that

2018-11-21 20:58:14 UTC  

You'd have to replace the whole gun

2018-11-21 20:58:22 UTC  

And it's a stupid idea

2018-11-21 20:58:34 UTC  

But it can tho

2018-11-21 20:58:51 UTC  

It's not a fundamentally dumb idea but adapting existing platforms for it would be difficult.

2018-11-21 20:58:52 UTC  

You can't just extendo the receiver and expect it to go well

2018-11-21 20:58:59 UTC  

a 7.62 NATO chamber and action is already rated for the pressure

2018-11-21 20:59:07 UTC  

That's not how that works

2018-11-21 20:59:19 UTC  

So enlighten us.

2018-11-21 20:59:28 UTC  

So the problem is milling the chamber to properly fit 7.92x57

2018-11-21 20:59:38 UTC  

Rofl let him speak a minute

2018-11-21 20:59:40 UTC  

Then you can fit a 7.92 barrel

2018-11-21 20:59:48 UTC  

It's a text chat you dumb fuck

2018-11-21 20:59:50 UTC  

The action of a 7.62 NATO to saami spec is rated for a similar pressure but for probably half the time

2018-11-21 20:59:56 UTC  

Not like you screaming over people in VC

2018-11-21 21:00:09 UTC  

Oh and a 7.62 and 7.92 barrel are in fact different

2018-11-21 21:00:19 UTC  

You're talking before he has a chance to respond you barbarian

2018-11-21 21:00:42 UTC  

7.92 barrel is 0.3mm wider, yeah.

2018-11-21 21:00:58 UTC  

Although you should use either 5R or polygonal

2018-11-21 21:01:26 UTC  

And if you can make it or have it made, it's not a stretch for it to have the appropriate mounting points for whatever receiver you want

2018-11-21 21:01:32 UTC  

It's not just the bore

2018-11-21 21:01:43 UTC  

An 8mm round has nearly twice the interference

2018-11-21 21:01:54 UTC  

Would lubing my gun's barrel make the bullets go faster out the end because less resistance?

2018-11-21 21:01:57 UTC  

An 8mm projectile to spec is actually above 8mm.