Message from @Stubbs
Discord ID: 514907132567748608
^^^
The barrel isn't the problem it's the chamber
The problem is your idea
You dense cunt
The barrel is entirely the problem
@RoflTank please god just build a new rifle
We're talking about a bore diameter that falls greatly short of the safe outer diameter
God you're a fuicking retard
The barrel is already 7.92
It's been replaced by a specially made one
>that's fuckin retarded
Try not jumping in halfway through
@Stubbs Shall I fill you in?
Is this retard trying to make a cetme in 8mm kurz into a cetme in 8mm
No
Because that's fucking retarded
lmao no
But probably not as bad as what he actually wants
A 7.62 NATO to 7.92 Masuer
He wants to rechamber one in 7.62x51 to 8mm Mauser
The only real problem is the cartridge length
And the Mauser shoulder being 1mm shorter
The receiver can't accommodate that
The barrel can't accommodate that
The action can't accommodate that
You'd have to replace the whole gun
And it's a stupid idea
But it can tho
It's not a fundamentally dumb idea but adapting existing platforms for it would be difficult.
You can't just extendo the receiver and expect it to go well
a 7.62 NATO chamber and action is already rated for the pressure
That's not how that works
So enlighten us.
So the problem is milling the chamber to properly fit 7.92x57
Rofl let him speak a minute
Then you can fit a 7.92 barrel
It's a text chat you dumb fuck
The action of a 7.62 NATO to saami spec is rated for a similar pressure but for probably half the time
Not like you screaming over people in VC
Oh and a 7.62 and 7.92 barrel are in fact different