you have a lot of idiots out there, like the ones that think using a rebreather when you are dealing with solvents in paintjobs are not needed if you just hold your breath while you spray and as soon as you turn of the spray it all fine
that is why I see most pre builds as a scam as you can do much better your self for much cheaper and 2 min on YT you find comprehensive guides even for the dumbest cave man to do it your self for free
well buying all the compatible parts was a bit rough for me, but someone could have made it a lot easier if they had explained "basically you have to pair your choice of CPU and motherboard first and go from there"
and i remember making sure all my TPD wasnt too much for whichever choice of power supply, but in the process learning that modern components really dont need more than a $35 PSU unless youre making some crazy system
tried to solder a jumper onto VDD pin, did a shitty job and it wont turn on anymore, removed it, checked that power is coming through the board, it is, but the pin wont show 5v on multimeter anymore
tomorrow ill try giving the pin 5v from arduino and see if the IC boots up--then if it does, look for a way to bridge the connection if i fucked up a trace, or else desolderit in case i left a short.
