Message from @Ace
Discord ID: 328655595928420363
FUCK ME THERES A NEW MAGISK
why cant you 3d print with clay
you can
just not on a normal fdm machine meant for plastics
COME HERE @transience YOU CUM RAG
also it's slow since the effector needs to be really heavy to support an extruder strong enough to squeeze out clay
u wot <:chink:323022148870602752>
it would just need a different extruder?
you'd need proper rails and lead screws on all axes, not a couple steel shafts and a belt
you'd basically be building a biiig milling machine but with a extruder instead of a spindle
Wait
which part is the effector
the effector's the bit with the working part mount on it
the part that moves
Oh
a clay extruder would look something like a filament extruder, but you'd need a much stronger motor driving the augur and a hopper that can support the weight
since yknow clay is pretty heavy
ohhh
it's just really not practical to print clay
the point being that you need a clay delivery system
yeah
i guess you could run the clay through a tube but that'd be unreliable
you really want the augur right up nearly against the nozzle
I mean... couldnt you get thinner clay
more diluted
i guess not
then you'd have to wait for each layer to try before laying another one down
you'd be looking at several weeks not several hours to finish a print
dry*
maybe if you heat the nozzle to dry it as it comes out, but again i'd be concerned about it clogging if there's any inconsistency to the clay
you could maybe use a static mixer but those are Expensive
Wont the heat plate cause the clay to dry?
and would wear out pretty quickly with clay
the first couple layers, sure
layers above that not so much
also: clay is abrasive as fuck, you would be replacing the nozzle very often no matter how you designed the thing
To be honest clay sounds like a bad material
for printng
what about glass
unless you got a solid corundum nozzle or s/t i guess but $$$$$