Message from @Deleted User
Discord ID: 362355989254635520
it varies from keyboard to keyboard so don't think the geometry is the same, you might have to just bend one side up and the other out
so pull out the spacebar until its loose but not off the keyboard, then push it to the right and lift the left side of the spacebar up
kind of like this
the metal does the succ on the spacebar
i dont have a stabilizer
there's no metal bar under the spacebar?
nope
what does it look like down there
i think its under the red pcb
i.e don't touch it because you wont ever need to
i dont see what's the problem, the center female goes into the stem, the left and right goes into the left and right cherry stabilizer male dongles
oh yeah it's under pcb i see it
first Mantistek GK2 I see posted on /csg/
yeah how much of your data does it send to china
^
i posted like 2 weeks ago on /csg/ that i'll do some wireshark testing but i haven't gotten around to doing it yet
>tfw you forgot about a battery bank but comfy posts a better deal
He's a top lad.
>$10 for a pin
chink clone when, I need my borb merch
Reeeee not chinkshit
^
what the hell is soft enamel
It's plastic
so should i just take apart the whole keyboard? because i really dont feel like doing it
you might, are you sure its not because youre not seating the spacebar properly?
as in the left and right and center are all connected
yeah it's all connected, looks identical on both sides
and both sides are still shit?
only the left one is
like it's shit when pressing from the middle to left
uh
you could try pressing really hard on the left side and seeing if it magically fixes itself
i dont know how that would fare with a cheap chinkboard
Smack the dirty slut
Its worth a shot as long as you're not mortaring it against the table
other than that, if you dont want to take off the front plate you can peer into the left and right holes and just try prodding at it and checking it out
lift it up and down, if it comes out then it there's your problem