Message from @spaqin

Discord ID: 610873179153629195


2019-08-13 11:55:02 UTC  

basically implanted a memory device in her hand and put deus ex on it

2019-08-13 11:55:07 UTC  

i probly would unlock my workstuff with nfc (implant or not) if not for my work stuff

2019-08-13 11:55:09 UTC  

and called herself a "cyborg"

2019-08-13 11:55:59 UTC  

but being scared in rfid readers where magnetic strips are used all over still in certain backwater countries

2019-08-13 11:56:35 UTC  

both require pretty much direct access for copy

2019-08-13 11:57:19 UTC  

difference being you can drop less than 1cm strip reader on any magnetic strip reader to copy the card what passes it ~ where as rfid requires perfect read for time it swipes given its not encrypted and is generic rfid

2019-08-13 11:59:49 UTC  

but yeah... silly people wanting to take steps to future instead of using punchcards (given submm glass "punchcards" are hackproof pretty much unless you steal the key and have wondermachine at home)

2019-08-13 12:02:40 UTC  

i think the company who tried to make them more popular in heavy security enviroments is gone tho

2019-08-13 12:03:56 UTC  

prettymuch glass creditcard what had optic holes and prism formations etc engraved in it with such accuracy that it was near impossible to make identical cards

2019-08-13 12:04:41 UTC  

costed like millions trying to see if there is data about what company made it

2019-08-13 12:06:30 UTC  

think newers U.S greencards but on steroids

2019-08-13 13:18:58 UTC  

are greencards common enough so that everyone knows them over there?

2019-08-13 13:19:02 UTC  

i thought they were for foreigners

2019-08-13 13:19:40 UTC  

>not being aware of how your own country's govt works

2019-08-13 13:29:42 UTC  

and i dont even live there

2019-08-13 13:29:47 UTC  

i just happen to know about their features :D

2019-08-13 16:25:49 UTC  

managed to get my hands on one 😄

2019-08-13 16:31:20 UTC  

is that a ruler

2019-08-13 16:31:54 UTC  

official novideo ruler

2019-08-13 16:31:55 UTC  

nice

2019-08-13 16:44:45 UTC  

ye it's a ruler

2019-08-13 16:44:48 UTC  

here it is next to the old one

2019-08-13 16:45:09 UTC  

the other side of the old one (top) is the same as the visible side of the bottom one in this pic

2019-08-13 16:45:15 UTC  

but arranged slightly differently

2019-08-13 16:45:41 UTC  

they got rid of the silkscreen on the new one

2019-08-13 16:45:44 UTC  

cost savings <:alismirk:230784726615588865>

2019-08-14 07:19:24 UTC  

ahhaha oh fuck... we once talked shit and theorised this at bar https://www.martinvigo.com/email2phonenumber/ nice to see someone has actualy done some research on it

2019-08-14 07:32:16 UTC  

Orange Pi zero 2 specs
``` Allwinner H6 ARM Cortex-A53 64-bit 4-Core CPU
with ARM Mali-T720 GPU
512MB of LPDDR3 RAM
4GB of eMMC flash storage
MicroSD card reader (up to 32GB)
HDMI 2.0a port
10/100 Ethernet
802.11b/g/n WiFi
Bluetooth 4.2
USB 3.0, USB 2.0, and micro USB 2.0 ports
26-pin Raspberry Pi-compatible header

Other features include an IR receiver, power and status LED lights, a microphone, and support for 5V power adapters that plug into the micro USB port. The system is said to support 10-bit H.265 HEVC video decoding at up to 4K/60Hz resolutions.
```

https://cdn.discordapp.com/attachments/527849695020580866/611099762225315850/orange-pi-zero2_01.png

2019-08-14 07:34:50 UTC  

then some other stuff in news feed today <https://cutiepi.io/> raspbi tablet
https://www.raspberrypi.org/forums/viewtopic.php?t=247380

2019-08-16 08:17:21 UTC  

Does the ethernet share the USB bus like it does with Raspberry Pi? (Not sure if it does that on the 4)

2019-08-16 08:24:18 UTC  

Orange Pi never did

2019-08-16 08:24:25 UTC  

(and the 4 doesn't either anymore)

2019-08-17 17:37:48 UTC  

hey anyone good with audio setups?

2019-08-17 17:38:02 UTC  

im a total pleb that just got a synth and have some questions

2019-08-18 23:07:33 UTC  

did you turn it on?

2019-08-19 11:48:16 UTC  

Will be interesting to see how the 3950x performs, and there's also new threadripper coming. But all those will be pretty expensive.