yeah, I should be fine, since I air out my room a lot even in winter

using Pantyhose/stockings

All the dust that enters it is the fine dust kind

yeah, I just got an idea from when you mentioned pantyhose/stockings

I should download CAD, gonna make someplastic tool that clamps unto cloth that you can insert magnets into and use as a dust filter

That would be so helpful lol

I really dont wanna hot glue my stock magnetic filter

yeah, that's no bueno

I can atleast finally use the shit I studied in industrial design

Send me a copy of the CAD when yer done with em hahaha

sure thing! lol

so I screwed up and bought fans that were all 3 pin, is there anyway to control the fan speed without accessing the bios or undervolting them? like an external controller or something, can't find any decent answers online.

So, you bought 3 Pins, so PWM is a no go

Theres still some 3 Pin Fan Controllers still for sale somewhere

they fit in the 5" Drive Bays

https://www.amazon.com/Phanteks-PWM-Fan-Controller-PH-PWHUB_01/dp/B00M0R05WE

this particular one is smol

but yeah 3 Pins can only be controlled by managing the Voltage that is run to them

theres also this

thanks! this was exactly what I was looking for

the one using a 4 pin header was exactly what I needed

But you still need to go into the bios tho

since it connects to the MB 4 Pin

the first one that is*

yeah, that's not much of a problem, my only problem with the bios was that it didn't have controls for voltage on the other pin headers

4 pin didn't have that problem

keep in mind, this is a change one, change all solution

yeah, that's ok

alright, glad i was able to help

```***PLEASE READ*** for anyone skeptical about what this device does (as I was before buying it because it does not explain anything on the product page), this device takes a 4-pin PWM fan header as a source for fan speed, and then converts the signal/selected fan speed into the corresponding DC voltage to control the fan speed on 3-pin DC fans to what you have selected on your motherboard's software, using a SATA power connector as a power source. PWM case fans are not common, and are usually expensive, so for people who want to configure many 3 pin fans to the same fan speed curve without blowing a fan header from plugging in too many fans to one of them, this is a perfect product. If your motherboard allows setting each fan header to PWM OR DC mode, be sure to set it to PWM mode or else the controller will not function properly. It is looking for a PWM signal to convert from, not a DC voltage. The only downside (it wasn't one for me) is that you cannot independently set each output on the Phanteks controller to a different speed. It will take the PWM speed coming from the source and set every 3-pin fan connected to that speed. I hope this clears up a lot of people's confusion as no one has clarified this as far as I know.```

yeah, Thanks!

Is exif data scrubbed on Discord?

No computer for a while

My pc gamer stoped running games properly

looks like video card cooler stoped working

i make sure to keep the "Boog Edits" file in the middle of the screen so my dumbass doesnt forget to actually post the shit i make

Anyone on here have the Galaxy Note 10 or 10+ ? I'm thinking of upgrading from my trusty S8

I'm a phone tech

If that helps

Oh ok nice

It would really only be a quality of life upgrade

I have the Note 10 and it's the best phone I've ever had.

A year this month - battery is kind of losin it, but if you slap a good case on it, you're laughin. There's a brand called PunkCase and I can confidently drop my phone pretty much whatever.

The phone + case are a bit massive, but the stylus and performance are to be fucking reckoned with (imo)

I have the note 8 and it's pretty great. I'm all for the notes

Yeet, im new here but I'm A+ and Net+ certified, currently working at an MSP as a Network Technician. Waddup, talk to me about flashing a BIOS in a thunderstorm.

Lol

Sounds spicy. You do any programming or more so scripting? @OverlordSaltBagel

It's mostly help desk, hardware and software break/fix but actually as of today I accepted a Sales Engineer Hybrid position!

Literally bridging the gap between the sales department and the service desk

Id be building out quotes and speaking with clients about their needs along with the sales guys and then work with the engineers to implement the support and setup of the equiotment!

Equipment***

Pretty neat ngl

Comes with a big pay bump, literally double what im making now, and its a position in my company being created especially for me so I get to build from the ground up with my Director.

Oh shit, nice dude! Good shit. Honestly, its important to have people doing the repairs or doing help desk stuff to sell what they're doing. Most normal sales guys just sell. They're good at over promising

Its dangerous to over promise. We're a small MSP of like 20 people and we have over 150 clients withba grand total of 3000 individual users

And of those 20 people only about 8 or 9 are help desk or engineering lol

@OverlordSaltBagel some of that pay better be budgeted for goon gear