Message from @Nic386

Discord ID: 508843013376835595


2018-11-05 03:11:59 UTC  

Original mark 7 and 8 ball, and all the stuff before and after pretty much never rimlocks

2018-11-05 03:12:10 UTC  

And anything with correctly made cases is fine too

2018-11-05 03:12:23 UTC  

It’s modern hunting loads that cause problems

2018-11-05 03:12:55 UTC  

It’s like using modern 30-06 in a Garand, just less severe:
Use correct ammo and there’s no problem

2018-11-05 03:13:52 UTC  

Rimlock is inherent to a box magazine fed rifle using a Rimfire Cartridge, how does older ammo change the issue, is the rim less square?

2018-11-05 03:14:34 UTC  

The Garand's issue isn't feeding due to Cartridge shape it's pressure, that doesn't make any sense as a comparison

2018-11-05 03:15:07 UTC  

How, mechanically, does "correct" 303 solve rimlock

2018-11-05 03:16:47 UTC  

the rim is beveled so that rounds slide over each other when inserted, and the internal geometry of the magazine is set up to allow and encourage this

2018-11-05 03:17:04 UTC  

Ok, so it IS less square

2018-11-05 03:17:09 UTC  

That makes sense

2018-11-05 03:17:18 UTC  

Correct use of stripper clips with proper ammo = no rimlock

2018-11-05 03:18:18 UTC  

Yeah, I haven't done anything with any surp 303, just modern FMJs, so that makes sense

2018-11-05 03:19:00 UTC  

The beveling might also help with the cartridges slipping over each other on me as I load the clip

2018-11-05 03:19:12 UTC  

Prvi used to do it right but I don’t know if they do anymore

2018-11-05 03:19:21 UTC  

My newest box was fucky

2018-11-05 03:19:26 UTC  

How do you load your clips

2018-11-05 03:19:30 UTC  

PPU was the last thin I put in it

2018-11-05 03:19:31 UTC  

Down up down up down?

2018-11-05 03:19:55 UTC  

Or like a nugget?

2018-11-05 03:20:28 UTC  

Usually by hand, out of the rifle, when I use strippers I have issues, but yeah, the Lee strippers look like they are all leaning towards the top Cartridge if done right

2018-11-05 03:22:04 UTC  

Btw, does Wolf use an undersized bullet or something in their 303? Every round of theirs I put through it keyholes, but PPU works fine

2018-11-05 03:37:21 UTC  
2018-11-05 03:37:28 UTC  

That’s not how the rounds are supposed to be seated

2018-11-05 03:38:01 UTC  

One is strait, the next has it's rim under it, and so on

2018-11-05 03:38:22 UTC  

https://cdn.discordapp.com/attachments/508382218612375565/508847519095062539/image0.jpg

2018-11-05 03:38:28 UTC  

https://cdn.discordapp.com/attachments/508382218612375565/508847543984062468/image0.jpg

2018-11-05 03:38:31 UTC  

This is doctrine

2018-11-05 03:38:36 UTC  

And it’s what works for me

2018-11-05 03:38:42 UTC  

It’s how they’re meant to be loaded

2018-11-05 03:38:56 UTC  

you’re having issues because you’re, well, doing it wrong

2018-11-05 03:39:31 UTC  

Seems like that would cause every other Cartridge to lock

2018-11-05 05:13:01 UTC  

Watch those two videos I sent

2018-11-05 05:13:05 UTC  

That’s how it’s supposed to be

2018-11-05 05:13:11 UTC  

And it works

2018-11-05 05:13:24 UTC  

It’s worked very very well for me

2018-11-05 05:13:39 UTC  

I’ve only ever had rimlock with federal soft points

2018-11-05 05:13:55 UTC  

Surplus ammo worked great, as did some prvi

2018-11-05 05:56:18 UTC  

It has some problems in the Ross rifle which doesn't use stripper clips for reasons

2018-11-05 14:48:59 UTC  

dump loading yee yee