@yergo ❤️

@fjogert at least you ain’t them

just use jewish bladder it's the best one

Post your cringe pink AR

I don't have an ar

A pink one at least

Some day I’m gonna build my little cousin a knights or BCM or something

And I’m gonna spraycan it pink

And I’ll post it constantly because it’ll be fucking hilarious

?

She wants a hello kitty AR so bad

What if they just strip the paint

She won’t

As the paint naturally wears with use itll look even more memey

Pink cerakote

Powerful

Give her hello kitty mags

Nah it’ll be just a standard rattlecan but pink hues instead of browns

Like just the face on a pink mag i guess?

Aluminums with a hello kitty superimposed on them somehow would be powerful

Idk how you’d do that

engrave I ❤ CBT

solar if you use a knife to carve that into your car’s paint I think the gatekeepers will let you in

No

Well doin that would definitely warrant a specific tag

Holy fucking shit. I want to bang the loli rabbit from Touhou 8 so goddamn bad. I can't stand it anymore. Every time I reach stage 5 I get a massive erection. I've seen literally every rule 34 post there is of her online. My dreams are nothing but constant fucking sex with Tewi. I'm sick of waking up every morning with six nuts in my boxers and knowing that those are nuts that should've been busted inside of Tewi’s tight rabbit pussy. I want her to have my youkai human/rabbit babies.

Fuck, my fucking mom caught me with the neighbors daughter. I'd dressed her in my sister's pink dress and rabbit ears and went to fucking town. She hasn't said a word to me in 10 hours and I'm worried she's gonna take away my PC and phone. I might not ever get to see Tewi again.

Anime bitches are fake and gay

Billy Harrington is eternal

hes dead

~~That's not actually Billy~~

*shush*

moron

aight so I'll assume that the MRA barrels + radian bolt are actually fine because the .223 rem go/no-go gauges are, well, shorter than a 5.56 fail gauge
the slight catching + friction of the bolt lugs on the chamber lugs on a .223 no-go leads me to believe that while it fails the no-go, it would "pass" both a .223 field and a 5.56 field "failure" gauge, making it safe to operate as it would likely not go into battery with an additional .003" and for sure not with the +0.01" of a 5.56 field gauge
this would make sense because, since the bolt is supposed to be mil-spec (and by all measurements the lugs are), it would be based on 5.56 gauges and is otherwise fine to operate, despite the .223 no-go failure. I also won't reload my 5.56 brass, so a short brass life means nothing to me

Now the question is my .308, which is the biggest fuck up of it all. Past return date, 25% restock fee if they do accept it, no indication of why it is not working properly. Meaning I have to drive an hour away and ask another company if I can keep fingerfucking their barrels and using the gauge dildo until I find a barrel that works with my bolt.

aight so I'll assume that the MRA barrels + radian bolt are actually fine because the .223 rem go/no-go gauges are, well, shorter than a 5.56 fail gauge
the slight catching + friction of the bolt lugs on the chamber lugs on a .223 no-go leads me to believe that while it fails the no-go, it would "pass" both a .223 field and a 5.56 field "failure" gauge, making it safe to operate as it would likely not go into battery with an additional .003" and for sure not with the +0.01" of a 5.56 field gauge
this would make sense because, since the bolt is supposed to be mil-spec (and by all measurements the lugs are), it would be based on 5.56 gauges and is otherwise fine to operate, despite the .223 no-go failure. I also won't reload my 5.56 brass, so a short brass life means nothing to me

Now the question is my .308, which is the biggest fuck up of it all. Past return date, 25% restock fee if they do accept it, no indication of why it is not working properly. Meaning I have to drive an hour away and ask another company if I can keep fingerfucking their barrels and using the gauge dildo until I find a barrel that works with my bolt.

aight so I'll assume that the MRA barrels + radian bolt are actually fine because the .223 rem go/no-go gauges are, well, shorter than a 5.56 fail gauge
the slight catching + friction of the bolt lugs on the chamber lugs on a .223 no-go leads me to believe that while it fails the no-go, it would "pass" both a .223 field and a 5.56 field "failure" gauge, making it safe to operate as it would likely not go into battery with an additional .003" and for sure not with the +0.01" of a 5.56 field gauge
this would make sense because, since the bolt is supposed to be mil-spec (and by all measurements the lugs are), it would be based on 5.56 gauges and is otherwise fine to operate, despite the .223 no-go failure. I also won't reload my 5.56 brass, so a short brass life means nothing to me

Now the question is my .308, which is the biggest fuck up of it all. Past return date, 25% restock fee if they do accept it, no indication of why it is not working properly. Meaning I have to drive an hour away and ask another company if I can keep fingerfucking their barrels and using the gauge dildo until I find a barrel that works with my bolt.

aight so I'll assume that the MRA barrels + radian bolt are actually fine because the .223 rem go/no-go gauges are, well, shorter than a 5.56 fail gauge
the slight catching + friction of the bolt lugs on the chamber lugs on a .223 no-go leads me to believe that while it fails the no-go, it would "pass" both a .223 field and a 5.56 field "failure" gauge, making it safe to operate as it would likely not go into battery with an additional .003" and for sure not with the +0.01" of a 5.56 field gauge
this would make sense because, since the bolt is supposed to be mil-spec (and by all measurements the lugs are), it would be based on 5.56 gauges and is otherwise fine to operate, despite the .223 no-go failure. I also won't reload my 5.56 brass, so a short brass life means nothing to me

Now the question is my .308, which is the biggest fuck up of it all. Past return date, 25% restock fee if they do accept it, no indication of why it is not working properly. Meaning I have to drive an hour away and ask another company if I can keep fingerfucking their barrels and using the gauge dildo until I find a barrel that works with my bolt.

are gorkas a meme or should I actually import one

meme, don’t

rog thanks