Message from @Chad Thundercock
Discord ID: 646779587614998534
Art socks!
I got them from this store, https://myored.aliexpress.com/store/1182567 , they are 1 size fits all , good enough if u are not bigfoot , feel good and the details are there. Overall great soft feel and they smell like socks bought from local shops
**BLF Q8 flashlight currently discounted at banggood (see <#287939846662651906>)**
literally the only three downsides:
**- you NEED button top 18650's due to the internal construction of the battery compartment**
- it's rather heavy (but that's to be expected from a beercan sized flashlight)
- lanyard loop hole would've been nice to have
extreme nitpicking edition:
- turning off the LED in the button is a hit and miss, you need to turn the flashlight on and turn it off in like a 0.5s time frame
(10 minute review courtesy of knife bro https://www.youtube.com/watch?v=XBd2zl3dmJc )
Checkup on Chef anons chinese chef knife experience after year has passed.
https://www.aliexpress.com/store/product/WHOKNEWOPDELIVERS/3508010_32852015427.html
>>> I bought a set of 6 knives on wish for a total of €47(original chef anon used >wish< but we know better (see <https://discordapp.com/channels/189466684938125312/287939846662651906/488778544088875040>)
Initial thoughts:
They look great, and feel great in the hand. The packaging they came in was nothing good or fancy. Really sharp and good looking
Usage over the past year:
The first day I got them I immediately compared them to a chipped, pretty dull but expensive good quality old stainless steel knife
Night and day.
Its just phasing trough whatever you cut compared to the dull knife.
After a week:
They are still sharp and not rusty. But I can see already that these knives wont last forever.
After about 7 months of usage, I sharpened them with a wethstone because I felt they needed that, after that they were sharp again and perfect to use.
Today: I still use them as my everyday knives. I go to culinary school now and still use them there. They are really good knives if you use them right and take care of them. For only less than €50 they are completely worth it. I dont think I’ll change them soon. Maybe at the end of culinary school I’ll go and buy a really good expensive knife. It would be better than what I have now and I would not replace these knives with the same set if these were to get lost, but I still dont feel the need to buy different knives because these are still so good
Bout some air dots, they're really solid for the price, much less obnoxious than air pods, actually stay in my ears and honestly have pretty good sound quality, they're so good I've started to use them with my desktop
The steel is soft and formed a wire edge while sharpening, but they took a decent edge. They were sharp enough to cut paper cleanly but not enough to pop hairs. The stainless steel is likely in the 50-52HRC range, which is softer that what most knife grade stainless steel than a knife, but still hard enough to take edge.
Just got my DIY T12-952 Oled soldering station freebie from Laecho (chinks says that they are were called Quicko)
So far so good. Made some safety fixes but it looks promising.
they're usually called ksger
check if your tip and case are properly grounded
sometimes they're not
They are properly grounded, checked with multimeter :)
Thanks for the tip
I think they got renamed to Quecoo: https://www.aliexpress.com/item/33053271822.html?spm=a2g0s.9042311.0.0.27424c4dsIMKib
nah its another OEM
/csg/ SFF case just arrived. Dream case's D1F-M. Other parts are still in shipping, but spare parts installed for reference. M-ATX case, without feet the dimension is 33cm x 28.5cm x 15.5cm, making it smaller than the big ITX cases. Metal is a bit rough to the touch and minor imperfections can be seen here and there if you looked closely. Both SFX and SFX-L PSUs are supported but SFX-L support is limited by card length. Space for 4 x 120mm and 1 x 92mm fans in normal thickness. Theoretically it can be open loop watercooled, but with potentially two bottom fans blowing directly at a 2+ slot GPU I don't think it will be necessary. A 30mm 240mm rad should be able to fit assuming your GPU is mounted in the first slot and it isn't too long. I have to finish the build to measure but so far an eisbaer does look like a good option for a full water setup. If airflow isn't good enough from the bottom I'd consider adding bigger feet to the case to lift it up. An 645LT AIO could also work if you are into that. Alternatively thermalright's 130mm tower cooler should fit in here with no issues.
I cannot find any info about the case online, is the model Dream D1F-M? Can you tell me where you bought it please?
There is a huge variety of small SFF case makers in China. Most of them aren't sold internationally with notable exceptions like GEEEK. This particular case can be found on taobao by just searching D1F. US buyers can use a service like superbuy to get stuff from taobao.
new revision headroom ms16 earphones
got them during 11/11
back in the day, the old version was hyped up a bit, but it seems they made a new one with different cable, packaging and sound quality supposedly
i paid 4.46 usd
honestly, these are good, but they have a few problems
the best part about these is the open-back design; combine this with the clean sound and these feel really great to listen to
but also because of that, there is a lot of sound leak. if you care about that, then you might not want these
the bass is a bit of a mixed bag here; for me, its a bit lacking (not that i prefer a shitton of bass), but for people who like vocals, these are amazing
and the build quality is pretty decent; cable is alright, and they feel decent in the ear
i just wish they put L/R markings on the earphones (wire with the mic is R)
in a sentence, **they sound good, but not great**
⭐ ⭐ ⭐ <:nostar:600452015142731776> <:nostar:600452015142731776>
for 1/2 dollars more, you should probably opt for sony mh750/755 instead of these
but if you're not that into bass, then these are a solid option