Message from @Fash Gordon UT
Discord ID: 401234419060572160
I found that off a quick google search. Might potentially be Franc/Norman though
Pretty common first name in France, not so common surname tho.
It says he went to a Presbyterian school and his father was a Chaplin
Probably a goy
Here is a discussion on his association with the MPA and his statements. I'll try and find the video at the scene of the crime where they discuss the white male suicide rate and start laughing.
Booyah! This video should make your blood boil.
So me and @The Hooknose- UT paid a visit to Salt Lake Community College earlier tonight.
Ha beat me to it.
Why can't I take good photos 😬
Mine suck too.
Photos are forthcoming. Please hold.
My personal favorite. We left a calling card on the car of a friend.
Pictures are shit tier. I need new niggertech.
Good to see some activism goys
Good job guys
wood handles for 2.5x12ft banner
handles do two things
1 stop the banner from curling on the 2.5ft ends
2 allow for a firm grip on one end using one hand
materials:
*8ft stair railing (if you have a planer you can plane a wood pole)
*double sided tape
*washers and wood screws (sizes shown)
cut railing to 30in
clean surface of railing with alcohol and affix tape
on ends of banner place 8 washers 3in apart ( from ends of the washers)
mark the wholes of the placed washers with a sharpie
cut CLEAN holes through the banner ( I used a leather punch but a hobby knife should work)
clean banner with alcohol and affix it to the tape on the railing
apply tape to the bottoms of washers and punch through the holes in the washers
tape the washers in place on the banner after cleaning the area with alcohol
pre-drill holes in the railing and screw in the screws
this whole thing fits in the box vista print sent it in I'm happy to report.
Very nice. Thank you.
Last night @Fiannafáil PA and I flyered the Mayfair neighborhood of Philadelphia.
@Sam Specter PA good job. Great picture quality!