Message from @billsikes
Discord ID: 539953852871606287
Nice I didn't know it was a standard
oof
well my soldering iron bit the dust
there any cheap soldering irons I can replace mine with?
ts100 (or 80)
ts100 is OK but ts80 probably better
because dealing with a laptop charger as a cable is cancer
sounds cancerous
vs a USB C cable
ts80 sounds like a better choice
you also need a power supply so probably not as cheap compared to those big yihua stations
Something tells me a 2.4A output isn't enough
kek
the case i ordered from american store
arrived from china
>marked as 100 usd value """sample"""
chinks will be chinks
based for saving me from taxes tho
woah you can buy (legit?) durex brand dildos on ali
durex condom over chink dildo? <:alismirk:230784726615588865>
@billsikes ugreen makes good cables yes
Are there any decent cordless soldering irons for occasional oddball stuff? Don't want the gas route. Just gonna fix my lighting and solder to the LED strips instead of lineman splice onto oddly mismatched size wires.
TS100 and tape some 18650's to it?
@timsandtoms lidl sell one for like £10
obviosuly only once/year
No lidl around PNW USA
i use a T12 clone with a QC3.0 power bank
you can get t12 clones that are integrated in to the handle
get the blue handle one, it allows you to hold the iron closer to the tip
you can buy them in a case prebuilt
you need to supply 12-24v
the ts100 is expensive if you just want occasional use
that will give you 12v from a QC3.0 power bank
the irons can do low voltage cutoff, so you can juse use a bare lipo
Anything that can just do a couple 18650#?