Tested with voltimiter - has juice

also zap test

But does it go ZAP

aye

Fuel tank plugged with debris?

Cleaned it, dried it

🤔

Does it flow into the carb?

Seems to. Have to take rubber seal off to check but it's wet in there

Also, “won’t turn over”, you mean “won’t fire”?

aye

You could run the primer button 50 times with the spark plug removed and look to see if gasoline is in the cylinder.

no primer button on that model

Pull start?

aye

but that's a good point

i havent looked into the cylinder while pulling

Gas sitting for a while makes me thing somewhere between tank and cylinder the flow is plugged.

Plus, no primer to force shit through

me too but I took the carb off the tank and cleaned the line (which is just a straw)

Need to verify fuel in cylinder

And the exit of the tank could be clogged

Could have an in-tank fuel filter

kk will report back on that. 9/10 small engine issues ive ever had are fuel flow problems

it does

I took it out

Could still be plugged

At the tank exit maybe

Lack of primer is stupid

old

Old shit had primers

There's pic of fuel straw (34 I think)

Lemme check cylinder for fuel and i'll report back tomorrw

When did it last run?
Is it a 2-stoke?

4

See, I knew it wasn’t old. Old stuff was 2 stroke and had a primer.

Did you change the oil and filter?

aye

When you pull, is the resistance normal? Do you feel the compression pulses? Does the exhaust go “blop blop blop”?

Air filter, is it good?

Yes, no, no