Message from @RevStench
Discord ID: 353294872800919572
Ok sorry for the short answer, busy at work doing some African engineering.
The plumb bob is the best tool for setting rafters, finding a level point and other things. It's an old way of levelling walls.
Tack a nail or put a screw in the side of the header wrap the string around the nail tight against the board, the plumb bob will attached to the end of the string, the plumb bob has a point on the bottom and will show you the outside of the footer. Run a string line or put a mark on the floor and that will line you up.
I want to go over how to use a speed/hand square but the best way for me to explain it is by talking rafters. Give me a few days and I'll get on it, I'll have to write a book.
Now thats a lesson i need! A speed sq cunfuses the hell out of me. Never had a proper lesson on one
Thanks much @RevStench
I got you bro @Deleted User. @Deleted User I wish I had a little extra free time on the job site to take some better pictures and do a better walk through.
Hell dude theyre fine
Better than mine!
haha thanks man
How hard would it be to make a bed frame for a queen size Ben?!?
Bed
not to hard. depends on what you want. I love those "floating" bed frames, and they are cake to make, and you could add storage in the box(frame).
I'll have to look up a guide
Floating frames look sweet
And you can be sloppy because no one will ever see hahaa. No shame bro
Haha I got a lot of stuff to learn
I'm a home owner now and my trailer needs some work,
This would be a nice project because if you fuck up a little, like I said no one will see it. And you can learn a lot.
Would a drill and a circular saw be good?
You can do anything with a circular saw.
It might not always be the easy way but you can do it
Okay good tyvm!
I pretty much have access to anything carpentry related. So if you need a little help with cuts, I might be able to show you how to make the cut in pictures. or a video
Sweet!
If I could buy any three carpentry tools to start my own home workshop for basic home repair and construction of simple wood objects like chairs, tables, birdhouses, etc, what would you recommend I purchase? Assume I have half of a garage to work with.
Probably a radial saw or a compound miter saw. A planer and a router table.
I feel like you could do any drilling with a hand held drill.
Chairs and tables would need legs or spindles, if you're turning them yourself you'd need a lathe or buy premade ones.
@Envian or @Jhawk nc might be able to give some good advice here. I believe they have hobby shops.
Ok I had to see what other guys out there recommended, and the router and planer is a must because almost everything is going to start with an even flat surface.
I saw one guy recommend a band saw but I feel like you could use a crosscut or circular saw. Now I'm thinking about it a table saw would be good because you can do some joinery on it, tenons and box joints, even the tails for dovetail joints. You can rip even parallel edges. It'll give you a good straight cut you might not be able to get with a circular saw.
If you're looking at making bedframes and things you should get a Pinterest. You can find a design you like and it will usually have all the measurements @Whitelash
@Whitelash Careful on the circ saw. Maybe check out some videos on operating if you're not familiar. They're simple to use but can fuck you up if the blade gets pinched and kicks out on you. I always hold my trigger arm out and perpendicular and in the direction of my cuts so you can put force behind the saw in case it wants to kick back. Also you can see what you're cutting being to the side of the saw
@RevStench Has some great pics in lessons for using a circ
@RevStench that window job was reeediculous!
^^^
Thanks guys. It really means a lot. That guide is a great start into the historic window restoration world. We're working with a couple of other guys to set a standard on historic windows also, so it was nice writing it out.
If anyone wants to see something specific let me know. I have a ton of jobs going, and I can probably pick up some more weekend work to get little walk throughs on new builds and remodeling.
Doing some boring ass stair treads on my rental today
haha get some Conway and you'll have a blast!
I just caught up on Jim goads podcasts