Message from @thatdudeiscool

Discord ID: 371794837986607105


2017-10-17 21:02:32 UTC  

From my experience in the Finnish army, we got to play around with the 556 and it seemed like we had to put two or three rounds more to get our metal targets to fall down, compared to the 762 which usually made the metal targets fall on the first shot (if you hit of course). This was even more noticable when the targets were behind bushes or any sort of object.

2017-10-17 21:03:03 UTC  

oh, 7.62 is a demonstrably heavier round for sure

2017-10-17 21:04:31 UTC  

I don't have formal military training, so take my shit with a grain of salt in regards to anything human conflict related

2017-10-17 21:04:44 UTC  

im just a good old boy from alabama who owns a bunch of them there guns

2017-10-17 21:05:16 UTC  

I believe this is one of the main reason why Finland is sticking to the ''outdated'' 7.62x39. We hardly shot at ranges further than 150m and even then there were usually brushes and shit in the way of our targets.

2017-10-17 21:05:36 UTC  

haha, we didn't shoot much live ammo though, so I don't have much experience in that way.

2017-10-17 21:05:42 UTC  

7.62 is a fine round

2017-10-17 21:06:03 UTC  

i have an akm, its fun to shoot, and cheaper to shoot than my ARs

2017-10-17 21:12:52 UTC  

I guess I've shot less than 300 live rounds

2017-10-17 21:14:15 UTC  

yeah thats a range trip for me, but then again, i live in the US, and in one of the biggest gun culture bits of it

2017-10-19 02:01:04 UTC  

2017-10-19 19:32:20 UTC  

2017-10-19 20:00:37 UTC  

I thought I'd share a webstore that sells quality stuff for a good price and fair shipping, even all the way to the USA.
I own multiple of their products, I've never been dissapointed with any of their products and their product descriptions are pretty funny some times.
https://www.varusteleka.com/en/product/swedish-cookie-cutter-reproduction/26933
>inb4 shill

2017-10-22 22:58:07 UTC  

Anyone know what to do when the oil drain bolt wont budge

2017-10-22 22:58:33 UTC  

are you on a car

2017-10-22 22:58:50 UTC  

Wrench wont take it off, ive tried hitting the wrench with a hammer, using a carjack to try prop it to move iy just lifts the car

2017-10-22 22:58:53 UTC  

Yea a car

2017-10-22 22:59:27 UTC  

you have penetrating lubricant and heat available ..did you warm the car before trying to drain the oil

2017-10-22 22:59:36 UTC  

I warmed it

2017-10-22 22:59:42 UTC  

Didnt lube it or anything

2017-10-22 22:59:56 UTC  

yeah i never had one stick im worried its crossthreaded

2017-10-22 23:00:05 UTC  

if so then fuggg

2017-10-22 23:00:18 UTC  

I beat the fuck out of it and it wont turn

2017-10-22 23:00:22 UTC  

😡

2017-10-22 23:00:23 UTC  

i beleive you lol

2017-10-22 23:00:49 UTC  

you dont have pb blaster or liquid wrench i guess

2017-10-22 23:01:20 UTC  

Not on me

2017-10-22 23:01:25 UTC  

I could get some

2017-10-22 23:01:45 UTC  

yeah it still might not work but its a cheap try you just gotta make a trip

2017-10-22 23:02:46 UTC  

if you are going to an auto parts store you might want to see if they have a new drain plug so you dont put the same one back in

2017-10-22 23:03:58 UTC  

Yea, ill try use the lube next time and hammer it off again

2017-10-22 23:04:28 UTC  

let the lube do the work you dont want to ruin the oilpan

2017-10-22 23:06:26 UTC  

I blame the jews for this

2017-10-22 23:08:08 UTC  

one probably picked that bolt since it saved a penny...if only we could keep them busy chasing pennies some other way...we will never find an answer

2017-10-23 08:31:56 UTC  

@chris Try hitting the bolt right on the middle with the hammer.

2017-10-23 08:32:13 UTC  

Unless it's an aluminum engine.

2017-10-23 08:32:47 UTC  

Then you're probably screwed

2017-10-23 08:32:57 UTC  

(Pun intended)

2017-10-23 17:58:41 UTC  

go buy a new plug bolt, then drill the old one out