Message from @fam

Discord ID: 599861799386480670


2019-07-11 11:43:18 UTC  

Extremely thin and loose material. Still provides protection from the sun, succs sweat and makes you look autistic. Recommended.

2019-07-11 11:44:32 UTC  

Good as a literal boxcutter, longer than it needs to be due to the bottle opener. Blade pops out when you press it too hard. Good for limited use.

2019-07-11 11:45:45 UTC  

Cool item to attach a flashlight or smal knife to your keychain. Can be operated with a single hand, not too bulky, never lost anything attached with it. Recommended for EDC fags.

2019-07-11 11:46:41 UTC  

Perfect holder for single 18650 unprotected cells, with enough space to fit foam spacers at the ends to avoid shorts.

2019-07-11 11:48:42 UTC  

NOT RECOMMENDED, the glue is very slimy and weak. It'll detach itself from whatever you tape it on, and leave a sticky, and ironically hard to remove, goo.

2019-07-11 11:51:43 UTC  

NOT RECOMMENDED, the tape is supposed to stick to itself, but it's very bad at its job - it WILL unravel.

2019-07-13 12:21:04 UTC  

Wiha screwdriver set is quite primo, spring loaded catch to retain the toolset insert which I did not really expect for some reason. Very nicely finished and the bits are marked, and slightly magnetised to the bit slots. Recommend!

https://cdn.discordapp.com/attachments/491172628917256192/599576029098409985/photo_2019-07-13_13-20-46.jpg

2019-07-13 12:21:05 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/599576032244400128/photo_2019-07-13_13-20-54.jpg

2019-07-13 12:21:05 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/599576033460486154/photo_2019-07-13_13-20-37.jpg

2019-07-13 22:51:50 UTC  

they are pretty solid, parts move well and the plastic seems good

2019-07-13 22:51:59 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/599734802475778048/MDB_0383.JPG

2019-07-13 22:54:04 UTC  

they are devoid of any decals the originals had and have a few sprue nubs
but otherwise are excellent, especially when you consider these are 1/4 the price of a legit one

2019-07-13 22:54:10 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/599735349773598730/MDB_0385.JPG

2019-07-14 07:16:37 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/599861798707134483/IMG-20190714-WA0009.jpg

2019-07-14 07:16:40 UTC  

Pretty good chinkpad

2019-07-15 21:56:11 UTC  

Ya boy here with another fatass review.
This Wallet is actually a KO/"Third Shift" of a Kickstarter project, the "Dax Wallet", normally selling for ~$12 USD, originally $28 (!!!) on kickstarter. It even came in the original product's packaging, which means it's most likely the real deal.

2019-07-15 21:56:35 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/600445631835668498/20190715_165048.jpg

https://cdn.discordapp.com/attachments/491172628917256192/600445633048084480/20190715_165135.jpg

https://cdn.discordapp.com/attachments/491172628917256192/600445633618378773/20190715_165123.jpg

2019-07-15 21:57:46 UTC  

It feels pretty cheap, but has a lot more rigidity when it has cards loaded in. Will carry for about a week to see if I like it, but right now it feels ⭐ ⭐<:nostar:600452015142731776> <:nostar:600452015142731776> <:nostar:600452015142731776>

2019-07-16 10:31:17 UTC  

I had one of these and it was almost unusable within a year
I chucked it for a generic 20$ wallet when it spilled my cards on a countertop bcz it had gotten so loose

2019-07-16 10:31:46 UTC  

The pocket on the back will hold like.. one or two folded bills at most

2019-07-16 10:38:28 UTC  

got lots of compliments and my new one doesn't :c

2019-07-17 23:41:14 UTC  

I received a PocketGo handheld emulation console today. I got it from: https://retromimi.com/products/pocketgo-retro-gaming-system

2019-07-17 23:41:38 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/601196849935679488/20190717_183438.jpg

2019-07-17 23:42:17 UTC  

It feels pretty solid while also being lightweight. It is very, very handlet-sized, though:

2019-07-17 23:42:19 UTC  

https://cdn.discordapp.com/attachments/491172628917256192/601197020937584645/20190717_183600_HDR.jpg

2019-07-17 23:42:50 UTC  

As for emulation, It seems *okay* as far as speed, but there are occasional hiccups with sound.

2019-07-17 23:43:42 UTC  

But the one thing that makes it a solid *meh* is the screen. Apparently, it's a 30 hz display, so it gets wretched screen tearing if you're playing something that's supposed to be 60 hz.

2019-07-17 23:44:11 UTC  

Probably won't bother you in turn based/slower games, but for something faster, it will be very, very distracting.

2019-07-17 23:46:16 UTC  

Side note: the unit comes with Famicom style buttons, but there are spares in the package that make it a super famicom, Which I ended up installing. It was a pain in the ass, since you have to unscrew the console, pry it apart, install the buttons (which just sit in sockets), and the shoulder buttons and other buttons will fall out seemingly at random. It took me about 30 minutes to do it. If I had known, I would have just kept the original buttons. There are now smudges on the INSIDE of the screen because of my hamhanded attempts to do this. No way am I gonna spend the time to completely disassemble it to do it again.

2019-07-17 23:47:32 UTC  

But as of now, *for the price*, I'd call this ⭐ ⭐ ⭐ <:nostar:600452015142731776> <:nostar:600452015142731776>

2019-07-17 23:49:07 UTC  

PS: The chinks shipped this full of games, too, which would get any dropshipper BTFO if they got found out.

2019-07-18 12:41:06 UTC  

Got it for $1.35 total.
Really huge, and at 32m gonna last forever.
Feels solidly built and not like its gonna split in half any second.
Adheres without issues, no problems where the white layer might split off from the paper.
No issue where the tape runs off to the side and gets jammed.
Instantly dries, writing on top of it has no problems where your pen starts peeling the correction tape off.
Entirely hides what you went over ie. it isn't see through.