If it’s new they’ll usually replace it

and you're sure that all of the front panel connectors are connected to the right pins?

and even if you are sure, disconnect them all, find the front power button connector and connect it to the correct pins, only that connector

@Bearchoyboi ^

What are you fellow Runescape players doing?

i fixed it

the motherboard fried because i forgot to ground my static by touching the case so i got it replaced it

@MalcolmReynolds do you need water cooling if you sli 2 gtx 1070s

@Polygon

yes

blocks for 1070s are a waste of money though

get reference coolers

No

If you have a typical ATX or e-ATX mobo, the top two pcie x16 slots should be at least 1 more slot apart than the bottom 2 on a 3-4 x16 lane mobo. Therefore having an acx style cooler is fine.

I have a GTX 1070 Sea Hawk X watercooled aio which stays incredibly cool under full load artificially, but it isn't necessary to have to keep the card that cold, if you max out at under 70C under full load for like 5 mins which is pretty unrealistic scenario, then you're way ahead good temps. Even resting just under 80C at that kind of load is acceptable. Over 80 and you're pushing it, but it still doesn't have much of an effect on the card. My GTX 760's (SLI) with reference blower coolers would max at about 84C under load brand new, and they had no issues the whole time, and still overclock well relative to better cooked versions of the same card. So there is honestly nothing to worry about. Also when it comes to GPU boost and overclocking the 1070, for a typical and stable OC on a well-cooled reference PCB, use about +100 core and no more than +250mem (100-200 is more practical since mem isn't as detrimental for gaming as core). Don't try and squeeze performance because the Pascal GPU lineup isn't really meant for it.

Also it isn't worth SLI for 2x 1070's unless you're upgrading from the first. But either way the best thing to do is get the single fastest card since Nvidia no longer pays for games to have SLI support, and the optimization for it is ass (especially from experience)...

If you haven't bought any cards yet, get the 1080Ti or wait for the Volta cards.

@Bearchoyboi

I know what I'm talking about, I have experience on pretty much any end.

Yea he’s right u don’t need it unless ur case is a baby

Buy a 1080 bundle on massdrop or something

Prices aren’t complete ass

just because you can run the cards at 80c with the fans on max doesnt mean its optimal

and single cards arent gonna run games maxed out in 4k or 144hz+

even the fastest cards on the market

@Bearchoyboi there should be no reason to water cool those 1070s unless you are hardcore clocking them for mining. running them at 75c will not hurt them.

and the king of autism is right about 4k - even a 1080ti will struggle with it

two 1080tis could handle it tho

75c wont hurt them but that increases heat for the whole system

heat and noise are a big problemo

sli in particular

Here's the thing. Playing max on 4K at a higher refresh rate than 60fps is something not worth striving for until after Volta imo. The best thing you can do is run a 1440p (2K) monitor with 120hz+ and Gsync. My monitor (Acer XB271HU) is 2K 165Hz IPS Gsync @27" and once you go to the higher refreshrate (especially with Gsync, it's pretty detrimental), you'll never want to go back and 4K wouldnt likely be as enjoyable. Also considering you can run 2K at higher than 60fps average very comfortably with one 1070 alone, so with a 1080Ti or newer Volta card it'll be a while before you need an upgrade. That's the best route imo and from other people I've discussed this with. Also an ACX 2.0/3.0 cooler card nowadays won't likely run the fan at more than 60% under high loads and will still keep the card under 75C no biggie. As long as you have intake fans in the front and outs on the top/back (or cooler on back), then you should get most of that excess heat trapped in the case out. 1070 SLI again, is less practical than the 1080Ti standalone and will also cost more for less performance on most games and lack of SLI optimization on many. If the game isn't optimized for SLI, you can only use 1 card.

@Bearchoyboi

I have a 1070 and I easily run games at very high 60fps at 4K 🤷🏻‍♂️🤷🏻‍♂️

Except for rainbow six siege, gotta use TAA at half res there

But 4K 60fps is much less enjoyable than 2K 120fps (especially with Gsync). At least that's what a couple forum polls and other people I've talked to said. From personal experience it's true. Even with Gsync, 60fps is a noticeable drop especially for competitive games. For example, Dark Souls 3 has an engine limit of 60fps. I enjoy the gameplay, but that jump from 60fps to 120+ is important for lots of movement, especially when you're used to it. And with Gsync making the frametimes even, with no stutter or tearing whatsoever, in movement, even not that drastic, I could easily see choppy displaying because of the frame rate. It's especially important for precision in games like that, and it really helps you get more information to your brain when you have all of those filler frames. Makes competitive, action and fast paced gaming much better. So although for visuals 4K is a little bit better, the framerate versatility and performance benefit of 2K is truly "optimal", especially if you have good money.

And Rainbow 6 isn't very well optimized tbh, little bad for comparison. Better to use something like Battlefield, Doom, a newer COD game, crisis 3 (still relevant), PUBG, GTA V, Metro: Last Light, Tomb Raider, and some others I'm not gonna waste time naming.

4K is really only practical for movies and laid-back games. If you're the typical gamer, the faster 2K is the best experience. Sorry if I'm getting repetitive.

nice meme but 4k will never be a thing ona single card

why do ppl always talk as if new gpus will come and games will stop getting more demanding

When the 2080Ti comes out, it should (if at least a 35% performance advantage over the 1080Ti which it almost certainly will be) be more than sufficient for max 4k gaming on current games at 60fps, but even then, 2K 120hz+ with Gsync is still the best way to go for gaming. Games will get more demanding, but also better optimized with new engines and API's. Therefore when games get more demanding and optimized, you can still have to option to play at a sweet spot based on your needs. That's why I still favor 2K 120hz+ Gsync panels for versatility and long term enjoyment.