CIA (Discord ID: 146612516263297025), page 1

@rachzo minimum barrel length/ minimum overall length laws kinda suck

Here in norway its minimum 40cm barrel for a rifle and the overall length needs to be 80cm or longer

They dont, they have mp5's and mp7's wich Are way shorter

@Skudd

Any lever action fans here?

Nice

@The Husky Lord im about to buy a reproduction 1886?

I am a gunsmith

I now have cancer

Its terminal

***dies***

@Richard E. Mango i hope you never try to fire that *thing*

How the fuck are you still alive

And what did the shells look like?

@Brae gunsmithing is fun

@Richard E. Mango couldnt you just get a cheapo pawn-shop breakbarrel?

@Leeroy im a gunsmith, i gotta make one of those mini mausers now, holy shit! WANT

actually

id probably need to be a watchmaker for that

lol

Yes

9mm luger is GUD

Steyr 1895 or nut'n boah

Wish ar's were legal here

I want to build a kar98k with that system

@Brae thats a belt fed danish krag. ew.

I want a steyr m95 bullpup

@Orphanzombie but, you would 100% need replacement parts for reactivating it though. A properly de-activated gun is made un-usable om every way. Reciever is weakened, bolt face is ground down +++

Anyone else want an aug?

Long barrel 5.56 aug *nut*

I want an aa12

But its illegal

@Ronwe Nanilgh'rinyth have tried

Njet fun

:Swastika: this is the windmill of friendship :Swastika: post it to all your friends who you want to keep chilled and cool during summer :Swastika:

Working on my 45-70 long range rig

@rachzo its a kongsberg shotgun reciever that im modifying to bould a nice rolling block rifle

im currently sanding down the rolling block to get rid of any factory machining marks on the outside

i found a shoulder massager that i really want to build

458 win mag mauser kar98k

also, speaking of long barrels, i just got my 90cm barrel blank for the 45-70'

(match grade lothar walther)¨

My teacher has a Mauser k98k in 458 win mag

Factory original stock, sights and buttplate

that madlab video gave me cancer

the rolling block is slowly progressing, finished polishing off all the factory machining marks today and started working on polishing the hammer and breech block to prepare them for colour case hardening

next up will be the trigger

its ok as is but a bit heavy, not much noticeable creep but its probably going to reveal itsself once i have a light trigger spring.

yup

atleast for the age

an original short lever martini can be had for a reasonable sum, you will need to reload ammo for it though.

https://www.ima-usa.com/collections/martini-henry-rifles

the cheaper ones are not cleaned or inspected for function/shootability but you can easily clean it yourself and after cleaning you can have a gunsmith inspect it for you.

https://www.youtube.com/watch?v=BDgAEMgYgbo&t=1453s

here is a good in depth video for reloading

(a lathe is not needed, the trimming can be done with a regular case trimmer

@Brae

lol

decided to go at my pee stool with a stoning and i managed to sqeeze it down to a 500 gram trigger pull

its a gamo air pistol tho but i reduced the trigger pull to 1/10th of the factory 😃

rolling block trigger is now at 1kg, will try to lower it more but im not sure if i can.

at some point the spring will become too thin

NO

the way he just calmly rattles off what he is doing

wow

50 bmg sabot rounds ❤

less kick, more speed, more penetration

https://www.youtube.com/watch?v=CTZMSKu4gLQ&list=WL&index=30

converted a blank firing zoraki 918s to full auto

as close to a legal full auto as i can get in norway

added a grub screw that holds the firing pin in the forwards position so its open bolt and as soon as wou drop the slide it will dump a mag

why?

its a blank firing gun

and it has an upwards facing gas port

@Leeroy well, im not too fond of it either but the full auto mag dump will be used once or twice at a gun range then i will remove the grub screw and make the gun semi auto again

This is just a quick and dirty bodge job to pull a quick prank on my teacher

Im a gunsmithing student

Im going to bring the blank gun to our first day at the gun range this year

@Snow Bunny i think it`ll be fine, wont aim at anyone, will be in my own booth at the gun range, will wear some thick gloves, a full face shield and leather welding jacket for protection. (the prank is to get back at our teacher for the time that he "accidentaly" flashbanged us.)

get a pcp riflw

rifle*

i`d recoment steyr but they pricey.

or a hatsan at44

at44 is great bang for your buck

steyr lg110 is THE air rifle to get if you want quality

there is a lg110 feild target version that is something like 10 joules

at44 can definitely be bought as a uk legal version

get an at44 or some such then

i have both a steyr lg110 and an at44, the steyr had an msrp of 2000£ when i bought it

at44 was something like 450£

look for a used at44

just DO NOT buy anything from fx airguns

fx airguns suck big time

i had an fx typhoon and the factory trigger wouldnt hold, it would leak really bad and the matereals used in its construction were so shit it basicaly ate itsself

when i worked as a gunsmith`s aprentice this summer we had four or five fx cyclone (semi auto) rifles come in for repair because they wouldnt cycle

@Diligently_Anti_Degeneracy i plan to build one of those at school

a luty smg would be super janky and definitely illegal but also verry educational

i feel sorry for my g98/40

took it to the range today and shot loads of old surplus ammo through it

it got really really hot

as in stock was sweating its finishing oil

<:OOF:469309419633770497>

Damn, thought it was a trash can 😂

@The Dominion European gunsmithing student

Cut down my russian sewer pipe

Its now open cylinder

It kicks

Might slap one of these on my baikal

It is a purely for the memes gun now

An open cylinder choke or a rifled choke shouldnt have mutch negative effect on the accuracy of a slug

lol

diddle yo daughters

make shitty guns

become tv star

lul

btw, going to supress the shotty

with the current barrel length (17.something inches) it will give the shooter a concussion

after like 10 ish rounds

norway bois

minimum barrel length here is 15.8 inches

so i will make an integral supressor

12 gauge shotgun tho

it aint no pistol

close to 34 inches total length

Rip

That ak appears to be a kar98 ish reciever/bolt with all kinds of cancer welded to it

Ps: pic of my shotty

T34's were just being cranked out by the ussr

Any of yall got a dimensional drawing of the front trunnion for an ak?

Thanks @KlieverTiger

I hate my brain.

Im planning to build a straight pull ak

But my spastic ADHD brain keeps going to weird places

Any suggestions on shops that might be able to export an ak bolt and a front trunnion from the us to norway?

Whot

Link?

Thats a rear trunnion

I need the front trunnion

@KlieverTiger the front trunnion is regulated but all needed paperwork Will be done before buying.

Akershus din skitne neger.

Wat

Men

Jeg er boors mekker

Ffs

Oi satan

Er du børsemaker?

Rip

Nope

Norwegistanian

Jobber ikke som børsemaker

Lol

2017-

Er ikke ferdig utdannet enda men -shhhhh

Jobber du på Kongsberg gruppen?

Ah

Ye

I know some german

Toten der juden.

Thats about it.

Lol

Hitler & Sons gunmakers

The garand ping wasnt a killer. No Ine would be able to hear it after all the pewpewing

@Carl Volt Kongsberg 1914 or no colt

@Carl Volt wot

Nei

Skyt med den en sjelden gang

Yes

Btw, i reeeeally want a kammerlader

@Carl Volt reloading components for 7.62x39 are easy to get

Bois

I got an antique revolver

Yee

Yup

Like that piece of absolute shit

This is much nicer

oo

<a:PoggersZoom:468570702191001603>

@Bobble except its nothing new

Lowering the bore axis of a gun has been done before.

True.

Tbh, id carry a Colt Walker

Btw, i wouldnt actualy carry a Walker. Way to Heavy.

Hardballer longslide 1911

It is a hardballer

Same

My baby lil sixgun

Yee

@Brae havent measured yet

Its thirty something tho

.31/.32/.36 or .38

Whot

I will shoot it, i bought it with the intention of making it a shooter

It needs some work but its going to be an allright shooter when its done

Ah

Wtf

Its not?

Its fairly easy

Pipe shotgun

Look at this badboy

@rat le roye its for a 1892 carbine (also called 1895 budapest?)

this is sporterized obviously but im having a hard time finding any non sporterized rifles

@Low quality mEmE stealer my rifle was sporterized by thomas bland and sons in 1893

mine is a 6,5x53r mannlicher

yup, just got 30rds if ammo for it and 4 en-bloc clips

Ar10 tho

💖

i have held an original ar10 (with its insanely fragile bakelite furniture) but have yet to hold an ar15

the world is a strange place

Yup

@Carl Volt did you also get to hold the c96?

ffs

Suppressr

Nice

anyone here got any decent detailed pics of the differences between full/semi auto open bolt uzis?

why

studying disconnector mechanisms

im just curious as to how a semi auto open bolt works

its a weird combination and im curious to see how it works

my guess is that theres a disconnector of some kind

I just came up with the craziest most lunatic gun ever

A danish krag jorgenson

In 45-70

Converted to a takedown

With a howell system

i want a rock-ola m1 carbine soooooooooooooooooooooooooo bad

but my shit ass country has banned the m1 carbine because the m2 carbine exists

norwegistan

yup

i have an m1 that is made by inland but its fate is hanging by a thin thread...

i will probably need to deactivate it.

the best possible outcome (wich i am doing all i can to achieve) is that the police agree to let me convert it to a straight pull rifle by permanently deactivating the gas block

yup.

wood is nicer than plastic

@Papa Benz i want to move but i need to be done with school first

Wtf

EW

the fucc is that

fire supressant?

lol

God damnit...

My 1892 steyr wont group worth a damn