newfags
Discord ID: 665035206402506772
19,534 total messages. Viewing 250 per page.
Prev |
Page 26/79
| Next
jesus
Your only choice is to give me the hat
was it grey or arid
orange cat rules of nature'd oglach
so now its mine, somehow
I forgot
arid
๐ณ bro pl e A SE
๐ฉ
are they really that hard to get?
you cannot buy them
you gotta have one
you could like two years ago
they don't sell them anymore and the company got bought out by a literal CIA money dump
twas a very limited run
I have it in a closet somewhere
I should dig it out
smh u don't even wear it
๐ข
BA furry spooks
yea I'm an abomination
fucking phone
tbf not sure if i'd wear it often
i've ruined many a limited hat and regretted it
like my torrey pines us open 2021 hat
yea that's why I never wear it out, I don't want to get it all sweatstainy
sweat is one thing, faded is another
@R-73 I got a rare dole hat that I use regularly
๐
I'll get you a Tim Hortons Kandahar 2011 Hat in CADPAT arid for it @R-73
how about trade for ULV plates and carrier
<:chinkaro:687021862328336446>
bruh
oh wait nvm got those already
you bring a berry hat to trade foy a ulv plate and carrier and i'll beat the shit out of you
Wheres that furry Yergo
So NICS is fucked. At least the lefties that voted for this shit get to freak out too.
I thought NICS just auto-approved after 72 hours or some shit
i love aya
i love hatate more
I think so, but I've also heard some shit about 2 weeks if there's no disaster, but that may be bullshit, it's hard to tell. I just hope someone still has G19 gen5 MOS models in stock and is willing to sell me one after 3 days.
>buying MOS
Are you anti pistol red dot or anti OEM optics cut?
The MOS sucks
My main handgat is a dot gat
Why does MOS suck?
I see a few people saying the screws come loose on MOS slides but as long I torque them down and loctite them I should be ok. I can use red loctite if I really have to. I know height over bore is increased with MOS but it's got to be no more than 0.5 cm.
And milling means your slide only works with that specific optic, and it costs an order of magnitude more than the MOS upgrade depending on who does it.
Is that a Thumper?
bruh so i went to a /gq/ meetup
I'm most concerned by the fact that they both look to be enjoying themselves.
Holy fuck the cost of a new slide, a new optic, and milling costs as much as if not more than a new Glock 19 gen5, so if you ever want to swap optics you might as well buy a new gun, that's insane. If it's literally just an issue of the screws coming loose then fuck that, I'm perfectly capable of using red loctite. And if it's a matter of the screws sheering then fuck it, I'll find titanium screws or something. I could buy a half decent AR with the money it takes to swap optics on a stock Glock.
Lmao is that copypasta
No, I really dont get how I can justify $400+ every time to change optics on a glock when a one time, $80 option exists.
Why would you need to swap optics?
Just get an RMR
An RMR costs more than the fucking gun. Maybe I'll get one some day but my price range for optics, when I get one, will probably be the same as for my holosun. And if you break an optic, you have to replace the slide too, since the side is fitted to the optic.
Looks like you can find them for $400 sometimes but still.
@Red Korvo buy a Unity Atom or one of the other adaptor systems
"I don't want to spend enough to buy a new gun just to swap optics."
>buy $550 gun
>buy $550 slide to change optics
Brilliant.
Anyone care to explain why the $70 MOS (plus loctite and maybe better screws) isn't a good idea in the face of $500 system?
HOE-VID 19 ๐ซ๐ซ
ACHOOโผ๏ธ๐คง๐คงWhat was thatโ๏ธโ๏ธ๐๐Uh-oh ๐ฏ looks like you just got ๐๐ corona virus ๐ค๐๐
Donโt you know Coronavirus ๐ฆ ๐ฆ is CUMMING ๐ฆ to America ๐บ๐ธโ๏ธ๐คข๐ค๐ค๐คค The world ๐ HOE Organization ๐๐
is calling HOE-VID19 ๐ a POTENTIAL PANTIE-DEMIC ๐๐๐
No more touching daddy ๐ฉ๐ฉ ๐ง๐ผ until you wash ๐งฝ๐งฝyour dirty ๐พnasty ๐คข little ๐ค๐ผfingers โ๐ป๐ค๐ปโ๐ป๐ค๐ปfor 6๏ธโฃ9๏ธโฃ seconds with sHOEp ๐งผ and water ๐ง ๐
otherwise it doesnโt count ๐คก๐คก๐คก
Time to stop ๐ spreading the germs ๐คฎ๐ฅด๐คand start spreading ๐งyour legs๐คค๐ฆถ๐ฝ๐ฆต๐ปbecause everyone ๐ฉโ๐ฆฐ๐จโ๐ซ๐ฆน๐พโโ๏ธ๐ง๐ผโโ๏ธis TWERKING ๐๐from home ๐ก
TAG 1๏ธโฃ0๏ธโฃ other coronavirus cucks ๐๐พ๐๐ปotherwise the coronavirus๐๐ is cumming for you ๐๐๐
People mostly dislike the MOS because the mount sits too high and the fit with the mounting plates isnโt good with some sights
I already had a gen 4, so cut and coat was only 175
@Red Korvo get an MOS and then save up to get an Agency optics system cut done on it if youโre that price sensitive
Are the Agency plates really that much better?
@All UCP Everything does anyone make better plates? I wouldn't mind getting a slightly more expensive third party MOS plate for a new optic.
Yeah, I think CH precision is the name of the aftermarket plate company
Iโm surprised you arenโt doing a p80
I would do a P80, but I want something that has a higher guarantee of reliability. I know P80s are fine but this will be my one gun that has to work, since it will be my CCW. I won't fuck with it either, all the critical parts are staying stock. My AR is pretty damn reliable so at this point it doesn't worry me too much but I figured I should have one weapon that was built and checked by people who do it for a living. My 10/22 was but.... it's a .22 LR. As we all know, that's way too deadly and should be considered a WMD. Too cruel to use that on Jamal.
If select fire was easy to get I would consider a 22lr minigun for my home defense weapon
Select fire is easy to get ๐
I mean like Walmart level of easy to get for a minigun
There are plans for making a 10/22 full auto. Also crank triggers don't qualify as full auto, so go to town.
I donโt give a single fuck about a full auto 22 for home defense unless it is specifically a minigun
22 has awful reliability, you need something with external power for feeding and ejection to make it worth a fuck for home defense
You own a drill donโt you ๐ค
Just get a holosun
Same footprint as the rmr
So you can upgrade down the line
Also youโre retarded if you replace the whole slide after you break an optic, which you wonโt do unless youโre being a fucking monkey
Probably will but still no point in milling a slide since they're fitted to the optic.
So put another of the same optic on
You don't understand what "fitted to the optic" means then. They measure your specific optic and cut your slide to its tolerances. The fit is nearly perfect. It won't work with other optics.
Let me let you in on a little secret
It fucking will as long as it has the same footprint
Ask me how I know
Iโm having an optic milled right now and they definitely donโt do that
Sure but the fit won't be as good or it will be too small.
Bruh
Did you give them your optic @All UCP Everything?
You are like the definition of a dude who reads too much on the internet and has no experience
Optics arenโt hand made artisan products, theyโre mass manufactured
Thereโs going to be so little difference in dimensions that it wonโt matter at all
Do they measure each specific aimpoint T2 and fit it to the exact fucking scalarworks mount you use?
>he didnโt pay extra dor the handfitted t2 from scalar
Iโve swapped between several rmrs and they all fit nice and tight in my milled gun
<:GT:665043145150431243>
Feels bad being a poorfag
Is a solution like a unity atom 2.0 or an agency AOS better? Sure but youโre gonna pay for it.
MOS is pure cope unless youโre trying to mass issue it out and you just want to have an easy contract vehicle
I love how youโre so fucking bothered about a guy milling something to your exact fucking optic when youโre just planning on grabbing an MOS and slapping a plate on there
You think that plate is going to be precision milled?
How ever is it going to fit your specific optic
Oh no
@5W all I have right now is the internet, idk where you expect me to have experience from.
Common sense broheim
No I don't expect the MOS plates to be precision milled. But a milled slide could be too small for another optic. I've only read about places that hand fit them, sorry I haven't heard about places that don't. I thought it just wasn't done that way. Industries do things certain ways for no fucking reason all the time so I wasn't surprised.
You listened to what a dipshit boomer said on a gun forum
Places will have you send in your optic so they can ensure they are cutting for the right optic
Otherwise some retard like you would buy a swampfox red dot and call it an RMR and then get mad when you ordered to have your slide milled for your โrmrโ and it comes back and doesnโt fit
If you have a 2 second conversation with the company they will say you donโt have to send it in
Also what happens to your โsuper precise tolerancesโ when you coat the firearm afterwards
Assuming youโre not planning on just leaving bare metal
Won't they coat it for me?
I mean, if I send it to a place that does that and I buy that service?
Theyโll do it or theyโll send it to someone else that will do it
What makes the MOS so bad that it's worth paying this much?
Itโs $175
MOS is $70, works with tons of optics, and doesn't require coating or even sending your slide out.
That's more than double, so it better be worth it.
A gen 4 is like 450 or less. Thereโs hardly a price difference and the only disadvantage is the ability to change optics
Especially if youโre getting an aftermarket plate for another 60 bucks
Do most optics worth considering use the RMR/Holosun cut?
And if you get RMR cut, youโre compatible with several holosun and SRO also
The only other ones are the deltapoint, acro, or the closed emitter holosun which I think has its own footprint
The others arenโt worth considering
Gotcha. I'm almost definitely going with holosun because of price but I'll look at the others.
So are the main advantages durability and height over bore?
Overall fit with the MOS plates are also a complaint
Damn this nigga got me trippin
Gotcha. I'll probably end up racking it with the optic a lot too so it will be good not to need to deal with that making fit issues worse.
Gotcha. I'll probably definitely going end up racking it with the optic a lot too so it will be good not to need to deal with holosun because of price with that but I'll look at the others making fit issues worse.
>his true goal was to support a chinese company
how very @Red Korvo of you
what she drinkin tho
a disguised modelo
Strawberry milk tea
nasty bitch
She's actually drinking a shamrock shake
***Available now for a limi...***
mmmm
Jahy
all the mcdees have broken ass machines, i only got one of the tasty nectar drinks
All their drinks are shit tee bee h
and mcflurrys are too
are you talking shit on shamrock shakes?
Yes
hoe ass
how can you not like them?
smh nigga actually got a shamrock shake
bruh
they are so good you niggas are dumb
They're on the low end of mediocre at best
I'd take chick fil a over it any day
no shit
nah mf I go to in-n-out, culvers, chik fil la, or whata for a shake
lucky
small town ice cream shops are unmatched tho
I wish there was a cookout around here
oh rite
we got
B R A U M S
๐ค
farm 2 da table
their chocolate cherry shakes were good af
based
Culvers
Culverโs is ass. Fucking T.G.I. Fridayโs slider sized burgers with five guys prices
how about you shut the fuck up
How about they actually beat egg yolks in the back instead of labeling their Dairy Queen soft serve as custard
Sure... but wait...
Ended up getting the MOS, but I'll probably get the C&H plate for whatever optic I get. I can always get a precut slide and sell my MOS slide if I change my mind. I appreciate the info you guys gave me though, it was very helpful.
It's Friday afternoon
bruh
๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ ๐ฆ
COOM
So many bunnies this week
maC
<@&665049812265336842> Report in
<@&684306740778500105> Get in here too
Gang
finally some weeb shit thats edible.
Norms are ready for the boog
@M3X0000 post gear
wow! gear!
Decent start. You planning on getting a belt or medical set up?
Yes
Is that an anchor point/arrester for working at heights?
wow i honestly cant remember when a newfag had decent gear
Retention lanyard, yes @Red Korvo
What do you use it for?
Looking cool. ๐
Pretty much
why do you have a texture file from a video game as you pfp?
Fair enough. I made myself a purcell prusik for basically the same thing when I got into rock climbing. Unfortunatly I live in FL, so indoors only and no real use for it. Nice to know how to use one though.
Wallet retention lanyard
Skin tones 3+ will understand
Not with 6mm cord, lol. I can't remember what the theoretical weight limit on it was supposed to be but I could fall on it no problem. Wouldn't try that on a cliff with 6mm, of course.
Do they make lanyards that are meant to be reused? I never liked the idea of one that made you stop what you're doing and replace it just because you fell on it.
Why does it matter @Crack cookah
Because he freaks out when he sees a pfp that isn't an anime girl with a throbbing cock.
Kemofure was just Blue Sub 6 where everything went good
Wtf is kemofure
shut the fuck up nigger
So sad that google doesn't come to the poor kids houses
face reveal
I'm pasty white you limp dick faggot.
shine is a funny way of spelling "death"
>That chin
Bruh I can't even try to be mean to you anymore, I'd feel too bad.
can someone post korvos haircut again
Post your chin so everyone can judge
<:sirsmirk:665043151982952460>
๐
19,534 total messages. Viewing 250 per page.
Prev |
Page 26/79
| Next