gunsmithing-discussion
Discord ID: 508382218612375565
1,228 total messages. Viewing 250 per page.
Prev |
Page 4/5
| Next
Le gouvernement vont pense que vous est un gilet jaune avec des fusil
*bon*
^^ le gouvernement ne vas pas faire long feu
Iโd say go ahead and get it then. Rifled shotguns arenโt the worst.
i think but the price of ammunation have a great gap between buckshot and slug
How much different?
6.70 for 25 shell of buckshot
and 8 for 10 shell of slug
0.54 cent of differance on one shell
Getting a rifled barrel shotgun to shoot anything other than slugs is a monumentally poor idea
The rifling destroys your shot pattern for birdshot and buckshot
On the other hand, smoothbore shotguns can shoot everything
Consider his laws, however.
I know because Iโve seen people try it in competition
Heโs cucked either way
Itโs France
Those prices are about what they are here. Slugs are cheaper there than Iโve seen here.
I usually pay between $0.90 and $1.25 each for slugs
its shitty ammo on good ammo triple the price
this ammunation is made by decathlon a french sport shop
i just want to shot cheap on the range and buckshot is cheat
cheap*
I mean, if you wanna shoot cheap, get birdshot
Here itโs less than $0.20 each
But itโs gonna be a total mess out of a rifled barrel. More noise and smoke than actually hitting anything
hum i dont thik is a great idea to get a rifled barrel if im gonna miss every shot
but more important is there any risk for me and the gun on the long term if a shot a rifled barrel with birdshot like premature wear or exploding cannon?
Pas bien pour la canon
Je pense pas que il vont explose mais come les anglophones on dit, il mourir le rayures
*je pense que ca cest la belle mot mais je parle la francais quebequois pas tres bien*
pas de soucis j'ai en parti compris ce que tu as dit
Will the rubber band grip damage the metal?
Jโavais pas des personnes pour practique mon frances avec, parce que cas je oubliรฉ un gros amont des mots
damage the metal i dont think but it can leave marks on time due to rubber to worn out i think
pas de soucis c'est assez fun pour moi aussi c'est rare de faire la conversation avec un quebequoi
Alright.
Vraiment je suis pas un Quebequois, je vienne du Nouveau Brunswick
Un demi de mon famillie est acadien
@sanglier thereโs no risk to the gun, just that it wonโt work well at all.
@Reichtangle ENGLISH ONLY ALL CHANNELS
C'est la vie you french niggers
Kill MACRON IN MINECRAFT OR SPEAK ENGLISH REE
@Sadmin fuck yโall, itโs not like Iโm a Mexican
Actually
Whatโs worse, a leaf or an illegal?
Both
Yes
I lived in CA for a long time
Knew plenty of illegals, never had any issues
They just wanted to work and take care of their families
Now, leafs? Fuck those guys.
Leafs must be removed, like kebab
Illegals broke immigration law to illegaly enter the US. Fuck them too.
Fuck illegals
>tfw no one wants to fuck me
Mood
Same
Penis
Illegally enter another country Cornfield
Fuck illegals. I immigrated to another country legally. They should have to as well.
Beaners
Has anyone here built a 9mm AR?
Why do you want to?
Because PCCs are sweet
They are pretty fun
"Why would you want to?" Is the enemy of the 2A
Just like how I want to build this new fangled 45 70 AR
That's an abomination
But it looks fun
Do they even make 45-70 mags?
Gonna look like a bubba'd AK-M4
Yes
But you need to cut the rim on the cartridge
Boys, I want a 10/22
How should I build it?
Go... buy one and shoot it?
bavarian stock
Bigger charging handle, run it like an AK.
16" Bull barrel and volquartsen innards
Buy the gun and shoot it, and then decide what you want to upgrade. Otherwise youโre just throwing parts at something and crossing your fingers.
^
You can't reasonably discern what needs to be tweaked without experiencing the base model
AK Build Tools:
http://www.tothtool.com/
those are the tools I used
bending the receiver is another animal
it's not as difficult as an HK receiver
pressing the barrel in isn't difficult with that barrel puller/pusher
some people use hydraulic presses
I preferred that rig
AK Builder is an excellent build resource for tools and parts
Fair to ask dumb repair questions here, or that more of the normal k channel?
๐คท
ask
I'm sure some of you have already seen that
I'm repairing my dads Mauser (mostly just cleaning really) and the lock sleeve spring on the cocking piece is a bit weak, leading to fun bolt shenanigans
It looks like an easy fix, just slide it out and in. Am i missing something probably?
second link shows step by step in pics
I looked for that, but my Google fu is week on guns
Thanks so much, it's exactly what i needed!
Looks like i should be able to do exactly what i was thinking. Doesn't look like i need to remove the mainspring either, which is good
Since this stock doesn't have that handy hole. Thanks, Spain
Iโm debating cutting the barrel down to forward of the piece of tape. 18 inches is just behind the tape in the middle of the hole. Forgot to measure over all length. Iโll need to move the sight at some point, and this girl already kicks like a mule. What do yโall think?
is it a Rem 870?
why not just get a new barrel, they're pretty cheap
Itโs not. Itโs a $99 dollar single shot from Walmart.
Saw that bitch off and thread in a sight
Get a machinist to do the sight if you cannot
Or leave it
I donโt know any machinists. Some of the sporting goods stores have clip on fiber optic sights I might mod on in the mean time.
Epoxy bb to top
JB weld
silver solder it
Just use one of the neon colored clear .12 gram airsoft bb's
No. Ima do it right.
>Do it right
>on a $99 single shot
Gorilla gluing a BB to the rib is about as right as it gets on those
Hack saw
Iโd do it now if there was a vice in the house. Two hacksaws, no vice. Not sure where the files are so Iโll have to use the SAK for that. No emery cloth.
sit on it and hacksaw the barrel off
no vice reqd
Alright. Fuck it.
Uh. A vice would help a lot.
Also, a file to clean it up after
There are plenty of fiber bead sights that have double stick tape.
Fuck this Iโm going to get a vice and an angle grinder.
the evolution of bubba's shotgun modding
So, the barrel is off, but i have significant filing to do.
You need a vice and a file.
And work it gently.
You don't know any machinists? Okay. What you can do is contact a shop you find and they can easily thread in a post sight.
Where my Sata nigga at, I am supposed to make him some new grips
Thatโs also me. Ended up taking a saw to it again. Got a good cut with minimal hiccups. Filing and sanding are next.
Real shit harbor freight tap and a drill
Eh. Iโd rather sand. Gives me more control. Almost finished anyway.
When you go for the new bead
Eventually.
Like I said, plenty of fiber beads that stick on with double stick tape. No need to tap. Iโve had one thatโs going on 3 years of hard competition use.
JB weld
I think Iโll just go with the tape like moonrunes said.
Just make sure you clean the rib with alcohol before you apply the sight
Alright.
Ooh purty
Thanks.
@Deleted User you were wanting to talk grips?
Yeah, if you still need new grips
I do. Still broke atm tho.
When I get a bit more cash, Iโll see what we can do. Iโd feel bad not paying you.
My srd-9 sits above the sights on my p226 wtf do i do for sights
what
Silencer height sights or try a red dot
Or.. use the red dot for sighting?
Entirely his choice, just giving him both options
you can always just disregard irons fully if you want
I just couldnt find any through sig but maybe im being too picky, i line to CC this gun so im not super sure about a red dot and i dislike electronics
Do i need calipers to put my sights back on? I don't have any experience in replacing irons
Get a sight alignment tool
Also ccing with an rds isnt that bad just replace your batteries regularly and mark on your calendar when you replaced them
^
You donโt need a sight alignment tool, it can be done with a vise, a small hammer, and a brass punch
Center it up using a ruler, verify at the range.
any y'all here own a G43? the rifle not the glockcock. Just picked one up the other day and I had to reinstall the safety and after installing it with a new retention clip the safety switch lever thingy fell off. I got it back on with little issue but I don't wanna get my first piercing from the safety when I shoot this thing
Friend, thatโs not a very common rifle. I would go to /k/ with plenty of pictures, or seek out help from someone with more specific knowledge. I hate to be that guy, but I donโt think youโll find your answers here.
That, and you gotta flex on the rest of /k/, you own a fucking G43.
Recommending /k/ as a source of information.
Seriously?
Itโs that, Reddit, a gunsmith, or books. I simply provide options, itโs up to him to take a course of action.
If you know a gunsmith with experience in C&R, it's been hit or miss for me
I've only met one who can help me with a Ross restoration and he only knew of it from a relative, although the G43 might have more luck
There are plenty of other milsurp resources, forums, etc
Fair.
I'd say Facebook groups tbh
Specialized milsurp groups are fine
Theyโre very helpful sometimes
Meme page admins if theyโre really specific
Caseless G11 Memes knows a fuckload about, you guessed it
And I have gotten a shitload of enfield help from the guy behind enfield memes
He flexed his No.1 Mk.5 at me
Imagine my shock, people with enough autism to make a meme page about a specific gun are autistic for that gun.
Much appreciated for the help fellas. Did some lookin around and the whole safety falling out is a fairly common issue with the rifle.
@Benjammin Franklin Post pics of the rifle pls.
And your others too.
i have kar 98 too
one sec
Kar98 has matching numbers on bolt and receiver as does G43 but the Kar98 has the proof marks scratched out. Bought it for $800. G43 has cost me almost $2700 and I ainโt even got the damn safety to stay on it yet
Ok but you have a G43
bow before him for he is a canonized wehraboo saint
10/10 would literally beat you to death with a shoe for G43.
Ditto
They might beat themselves to death and eat expensive ammo
But hooo boy
Muh selbstladengewehr
Fun fact, the G43 was purpose built for the cold. In cold weather the fixed gas port makes it operate flawlessly, but all you have to do in temperate or hot weather is change the bolt spring.
Another fun fact, the G43 uses a *carbon copy* of the SVT's adjustable gas port.
So you can literally replace it with a repro SVT adjustabl gas port and it's a perfectly functional all-weather rifle.
And it wonโt snap beat itself to death then?
Nope, just remember to change the bolt spring or adjust the gas regulator.
Y'know, basic considerations
The G43 is plagued by bullshit myths
What about that thing about Jews supposedly being forced to make rifles for the Wehrmacht? Personally, I wouldn't think letting prisoners who hate you and your system make weapons for your army to be smart, but that's the claim frequently made about the G-41 and G-43.
Just check the armament code.
ezpz
Most if not all G41(w)'s and G43's were made in Walther factories.
If you havea G41(m) it's a neat show piece but unlike the Walther models it's not going to function well.
Speaking of Walther firearms, what's the deal with the PPK? Is a Bersa Thunder more cost-effective?
Or do you get what you pay for with the Thunder?
It's argentinian, so... yeah.
It's not a bad gun at all.
The bersa does the same shit cheaper and has a few autismo features the walther doesnt
Argentine guns are miles better than >Brazil
Theyโre Spanish quality levels
@Reichtangle Tell that to my Imbel lmao
Cheap but functional
Valid
Iโve heard good things about the thunder from poorfag leaves
And the FAMAE sig clone sells well here too
She's beat to all hell but goddammit she just won't stop running.
Although sales donโt mean good, mind
The Bersa is good. My dad carries one.
Bersa is fine
I've shot it, it's plenty accurate.
Get the combat model. Holds 15 vs 7
Double stack and all. Just less compact.
Neat
My first handgun will still probably be a surplus P1 or 92
Everyone I know that I told about me getting a ppk said go for the thunder
CZ-83
lol
Anyone have experience with toth AK tools for self builds?
yes
only thing I would recommend is a pneumatic rivet squeezer
Harbor freight is your friend
the bolt cutter rivet squeezer works OK, but it doesn't squish the rivets as well
.450 bushmaster uppers will fit a standard 5.56 lower right?
Yes
But 450 is gae
they will, thats the point
Of course itโs gay
But thereโs a neat minecraft bug where villagers sell .450 mags that fit 5.56
So your minecraft lower doesnโt have magazine limits
So what you sayin is
Hol up
You sayin
They makin .450/5.56 followers fo them STANAGs?
shhh
Itโs .50 Beowulf mags again
1,228 total messages. Viewing 250 per page.
Prev |
Page 4/5
| Next